ROG Swift OLED PG27UCDM Firmware 1.07 removed from website?

[larsiano]

29- oktober I downloaded the latest ASUS_PG27UCDM_MCM107.zip firmware for the monitor from the official website support page and installed it. Since my trouble with my 14th Gen. Intel setup leaves me with a system about as stable as an active volcano I looked at the site again this week and the update is gone??

Should i worry, leave it as is or downgrade to the now latest 105 version? Thank you!

[Matejlipton]

Same here.

[USERMAC]

I would also like to know why they removed the Bios version  MCM107.  

[MikeNJ72]

I had installed MCM107 last week and noticed that it is no longer available as well.   However, I did encounter an issue with the pixel cleaning, where it seemed to be flashing colors on my monitor for over 10 minutes and seemed like it would never end, so I had to shut down my computer.   I suspect it was removed due to that issue.

[USERMAC]

I had the same issue with different different colors when doing the pixel clean but that issue was also present on the firmware MCM105 so rolled back to MCM103.  

[MikeNJ72]

Yeah, I didn't think that behavior was normal, so I rolled back the firmware to MCM103 and ran pixel cleaning.  This time, the display turned black for 6 minutes with the ASUS logo blinking orange.  Once completed, the display came back on and the ASUS logo turned red.  This is how I remembered it to be in the beginning.  

[oo-viper-oo]

Same here, pixel cleaning led to rotating colors once. And proximity sensor is not working. Is it ok to roll back? And is there consensus regarding what version is best/safest/most reliable?

[MikeNJ72]

Yeah, there are still issues with the proximity sensor, which have not been addressed with the latest firmware.  For now, I am just using a Windows Power Plan to turn off the display after 5 minutes of inactivity.  It seems that MCM103 is the safest and most reliable firmware version right now.  I am able to successfully run the pixel cleaning without the flashing colors on the screen.  

[Timelapse90]

i updated to MCM107 but there is gone on the driver website, no issues for me on MCM107!

[MikeNJ72]

I didn't even realize that there was a firmware MCM108 release.   Did you test the proximity sensor and pixel cleaning with this firmware?  It is weird how they keep posting and removing firmware.