So I cant get my pg27aqdm to do the firmware Update. I own the monitor for 4 weeks with no other problems. Got the driver of the asus page aswell. Monitor and Hub are showing in device manager and work.
My guess is that its because i also have the pg42 (done multiple firmware updates on that) I uninstalled the old firmware updater and restarted ( as said in the read me) but the onekey tool does not seem to start properly. I shortly does something and then just says fail, task manager shows no activity. It also does not read the current firmware version
Im lost, any idea on what to do? Is there a way to put the firmware on a usb and update that way?
So I decided to try with my old Laptop and it worked first try with the monitor only beeing conectet via usb and while in standby mode....
I guess something on my main pc made the updater not work I just dont know what it is.
Could you help confirm if you have completed the monitor firmware update after switching to the laptop?
If you encountered difficulties during the update process on your original PC, we recommend referring to the notice and subsequent steps provided below the update SOP.
Yes, can confirm.
I never unpluged the usb on the monitor, just switched from the motherboard of my main pc to a usb port of the laptop.
I dont know what could cause the issue on my main pc. As I already said i did every step thats in the SOP.
Since it seems that you haven't mentioned the steps to remove the ASUS VLI FW update tool 0.0.0.1, I would appreciate your confirmation as to whether you have followed the steps in the SOP page 2 to remove the FW and restart before executing the PG27AQDM key tool to update the FW.