Keris II Ace + ROG Moonstone Ace L via AC Calibration

[morph_]

The Armoury Crate Calibration mode with the Keris II Ace & ROG Moonstone Ace LROG Moonstone Ace L.
Was this ever QA'd? It is extremely sketchy and completely unusable. It hardly tracks the mouse when reverting back to the default preset works much better even after trying calibration it occasionally skips mouse movement tracking.

The only way to describe it is very slow to the extent it is visually laggy and the tracking seems to skip a lot of the input. Results are the same for both polling rates of 8kHz and 4kHz...

Device Ver: 3.00.16
Dongle Ver: 6.00.21
Booster Ver: 2.00.09
Win 11 Ver: 24H2 

[Nate152]

Hello morph_

I also have the Keris II Ace and Moonstone Ace L mouse pad.

I think this is normal, at the end of the calibration it should show it was successful.

Move your mouse in a figure 8 during the calibration, does it show it's successful at the bottom?

[morph_]

As per my description after calibration, the issues I describe are still present

[Nate152]

Thank you for confirming there's still an issue.

Have you installed the polling rate booster firmware update?

This might help if you haven't.

ROG Keris II Ace | Gaming mice｜ROG - Republic of Gamers｜ROG Global

[morph_]

Have you tried the moonstone preset in AC?

Yes I believe I have v1.0.0.2, SS as per my OP here are my versions:

[Nate152]

You look up to date as your versions are the same as mine.

The Moonstone Ace L preset is working good for me.

Have you tried setting the Lift-off Distance to high?