cancel
Showing results for 
Search instead for 
Did you mean: 

Gladius II

Links
Level 7
Hi everyone.
I'm have bought this mouse, and while it is on it's way, I have been reading reviews.
Many people complaine about rubber grips peeling off after several months of light use.

Does anyone have this problem? Will this be a warranty case?
If not, then I should send it right back ASAP, cuz I don't want to superglue a 90 eur mouse.
4,663 Views
6 REPLIES 6

Skunkfoo
Level 7
Links wrote:
Hi everyone.
I'm have bought this mouse, and while it is on it's way, I have been reading reviews.
Many people complaine about rubber grips peeling off after several months of light use.

Does anyone have this problem? Will this be a warranty case?
If not, then I should send it right back ASAP, cuz I don't want to superglue a 90 eur mouse.


I've had mine since May 2017 and so far no issues with peeling grips. I did however have to remove 2 of the 4 the rubber screw hole covers under the mouse because they just would not sit flush. This cause it to rub on the surface and made it impossible to move smoothly.

Links
Level 7
Sounds hopeful.
Thanx for the answer.



P.S Does anyone else owns Gladius 2?
Give some feedback plz. Especially on those rubber pads.

I have this mouse
Everything is fine, though the software is a little bit buggy, but it is being corrected on the sly.

Mouse feet are better to replace immediately, they are identical in size and form to Microsoft IE3 (This I say for support the asus, they could not tell me where to get spare mouse feet).
https://www.aliexpress.com/item/Microsoft-IE3-IO1-1-Hotline-Games-Professional-Gaming-Mouse-Feet-ska...

much better glides then original and the surface is ideal:

Well, replacing mikrikov - just super

Lateral rubber for a year did not come unstuck. But the feeling is not super, especially when the hand sweats...

There is also a slight backlash left button.

What else does not like, in gladius 1 the micro switch under the scroll wheel was replaced, now there is no and it is hard click.

Links
Level 7
Какой у тебя интересный акцент - "микриков" это из какого словаря?))
Ну как я понял, в общем нормально все?А то облезет, как китайщина дешевая, а стоит с*ка, как-будто на века сделана.

Ха 😎 бля не заметил 😎

Да, пока за год не облезло. Микросвич лучше сразу поставить Японский, который идет в комплекте, правда я поставил d2f-f-3-7 ( это Япония на 20М, внутри намного лучше сделано, чем те что на 50м китайские). Более быстрая отдача обратно, мне так больше нравиться.

Ноги мне не нравится, грубая обработка, я заменил на те что давал по ссылке - не скользит, а летает 😎

Сенсор супер себя ведет.

Пластик на ножках, которые нажимают а микросвич, за год не задрючился, как новый. Вообще на материалах не экономили, сэкономили на самих ножках и не положили запасные, как раньше.

Ну и энкодер ALPS немного громкий, может кому-то не понравится, но мне нравится четкость отсечек.

Правда с ROG Armoury такой косяк у меня. Обещали исправить, но пока так и осталось ))
https://rog.asus.com/forum/showthread.php?96091-SOFTWARE-ROG-Armoury&p=680963&viewfull=1#post680963

Links
Level 7
Спасибо за инфу.
Пока что о мыше негативного сказать ничего не могу, вроде все устраиват.
Позже, возможно, что-то вылезит.

А вот асусовский софт - гавно высшего сорта. Что аура, что ГПУтвик....просто ужас.
На мамке подсветку, сука, неделю настроить не мог. Не сохраняет и все...
И вывести потом этот софт не всегда получается. То процесс какой-то действует, то просто не удаляется.


До этого....или до до этого у меня была какая-то логитек или что-то дешевенькое.
И там были вот такие же накладки на боках....облезли, падлы, через год.
А под ними клей - хер отмоешь. Руку пачкает, грязь к нему липнет, а резинку держать не хочет.

Вот переживаю, чтобы тут так же не получилось.


П.С о чем еще можем поговорить?) Разгоном увлекаешься?Рас уж на этом форуме...