Asus ROG Harpe Ace Aim Lab Edition firnware

[OnderoCZE]

 Hi, I purchased this gaming mouse. Could anyone advise me on how to update the firmware? Thanks.

[Nate152]

Hello 0nderoCZE

1) Connect the charging cable to your mouse and a pc usb port, you can use motherboard or pc case usb ports.

2) Set the wireless switch on the bottom of the mouse to wired mode (switch set to the center position).

3) Connect the wireless dongle to a pc usb port.

4) Close Armoury Crate.

5) Download and install this firmware update to update to the ROG Omni Receiver. If you already did this, skip this step. - ROG Harpe Ace Aim Lab Edition Gaming Mouse | Ambidextrous | Gaming GAMING MOUSE｜ROG - Republic of Ga...

6) Open Armoury Crate and do the update at the Armoury Crate Update Center.

[OnderoCZE]

Everything worked. I would like to ask again, I can't find any way to turn off the wheel lighting when the PC is turned off.

[Nate152]

Good to hear the updates went well.

You'll want to disconnect the charging cable and set the wireless switch on the bottom of the mouse to 2.4GHz wireless mode.

Then shut down your pc, the lighting should go off.