Take over settings for ROG Azoth from one computer to another

[JayAR87]

Hello,

I have the following problem and don't know how to fix it.
I am using my Azoth keyboard on 2 different laptops. My private one and on the one from work.
So I changed some of the settings on my private compuiter in the software and everything is fine.
When I now use the Azoth on my laptop from work, all the settings are gone. If I move back to my private one, everything is fine again. I also cannot install the software on the working laptop due to missing Admin user rights.

So is there a possibility to take over the settings?

On both of the laptops I am connected through the USB dongle.

Thanks in advance if somebody can help.

Best!

[Nate152]

Hello JayAR87

You can create up to five profiles and save them to the onboard memory. You can do a lighting effect with an OLED effect or custom image and save to one profile.

After you have your profiles created and saved, you can access them by pressing Fn + 1,2,3,4,5. 

[JayAR87]

Hello,

before that, everything was configured under the default user profile. Now I tried to use the profile 1.

I connected the keyboard to my private laptop. Did the configuration. Saved everything. Connected to the working laptop. Made sure user profile 1 is still selected. And again, all settings of the OLED are not available.
If I connect back to my private laptop, the settings are there again.

To have the settings also on another computer, does the Armoury Create Gear Software needs to be installed also on the other computers?

I also updated the keyboard and the OMNI receiver to the latest version.

[Nate152]

 Have you saved the profile to the onboard memory?

Follow this video, I created two profiles and saved them to the onboard memory. Once applied, access them with the Fn+1, Fn+2 keys, you can create and save up to five profiles to the onboard memory.

Does this save your profile and can you access it with the Fn+1 keys?

[JayAR87]

Hello,

unfortunately this did not the job. Even though in the newer software version it looks a little different, but I did the same steps.
If save the settings on the memory of the keyboard, but as soon, as I switch to the other laptop, the settings are gone.

[MasterC]

You'll need to install Armoury Crate and enable Auto-Backup and Restore (settings saved in cloud). Make sure to use an Admin account in Windows (not standard user). 

[JayAR87]

I use of course the Armoury Crate software. I checked all the different sub menus. But didn't find the "Auto-Backup and Restore" settings. Can you tell me where it should be?

[MasterC]

It is under User Center (above Settings).