cancel
Showing results for 
Search instead for 
Did you mean: 

ROG Azoth could not connect wireless

Zeturex
Level 8

Hi All,

Ive been reading the forum regarding Azoth Keebs 2.4ghz wireless, however the solution provided seems not working. 

Ive done deleting the HID driver, as well as reinstall the software but still i could not connect to 2.4ghz.

Please help to resolve this issue, i have attached as well my the latest firmware as of today.

Zeturex_1-1716546869512.png

 

279 Views
1 ACCEPTED SOLUTION

Accepted Solutions

Nate152
Moderator

Thank you,

Click the link below and do the firmware update, make sure the wireless dongle is connected to a pc usb port.

ROG Azoth | Gaming keyboards|ROG - Republic of Gamers|ROG Global (asus.com)

After the update, check if you have the ROG Omni Receiver in your Device list and try 2.4GHz wireless mode.

How does it go after the firmware update?

 

 

 

 

View solution in original post

5 REPLIES 5

Nate152
Moderator

Hello Zeturex

Have you updated the wireless receiver to the ROG Omni Receiver?

It should show in Devices at the left of Armoury Crate, click it and you should see this.

omni receiver.png

 

 

rog azoth 2.png

 

 

Hi Nate,

I dont see any any Rog Omni in Armoury Crate.

Nate152
Moderator

Thank you,

Click the link below and do the firmware update, make sure the wireless dongle is connected to a pc usb port.

ROG Azoth | Gaming keyboards|ROG - Republic of Gamers|ROG Global (asus.com)

After the update, check if you have the ROG Omni Receiver in your Device list and try 2.4GHz wireless mode.

How does it go after the firmware update?

 

 

 

 

It works now thank you, apparently need to update the firmware with Omni receiver.

 

 

Nate152
Moderator

Great, good to hear it's working.

You may get another update in Armoury Crate.

You may already know how to update your keyboard in Armoury Crate, but I'll list the steps just in case.

1) Connect the cable to your keyboard and a pc usb port.

2) Set the wireless switch on your keyboard to wired mode (switch set to the center position).

3) Connect the wireless receiver to a pc usb port.

4) Try the update in Armoury Crate.