cancel
Showing results for 
Search instead for 
Did you mean: 

ROG Armoury II - V2.04.07

MasterC
Community Admin
Community Admin
ROG Armoury Version 2.04.07 is now available for download.
https://www.asuswebstorage.com/navigate/s/2C2BEC4330D04A4482B68FCF941F3BEA4
or
https://www.asus.com/ROG-Republic-Of-Gamers/ROG-Strix-Flare/HelpDesk_Download/
Supports: Windows 10 (64-bit) and 7 (64 & 32-bit)

*** New in Version 2.04.07 ***
- New user interface
- Mouse driver base - software simulated functions are now enabled even without Armoury II running in the background. e.g. mouse macros.
- More options for lighting customization

71846

71847

*** ROG Gladuis and Sica are not yet supported. ***
_____________________________________________________________
FPS, Racing, and VR Gamer / Tech Enthusiast / ROG Admin
693 Views
93 REPLIES 93

80% is the main keyboard the 20% is the numbpad

if you want to update the numpad you should use it...

Hi there,
the german software is still showing the qwerty layout of the keyboard. It should be qwertz....

ASUS has released Armoury II v2.04.09. The release date is listed as April 2, 2018. It's available for download from the website and should show up via the internal Armoury updater.

Version 2.04.09
2018/04/02 103.95 MBytes
ROG_Armoury_v20409

Armoury 2.04.09
1. Glaudius II & Glaudius II Original & Pugio can adjust wave lighting speed.
2. General bug fixes
3. UI improvements


I'm posting here because I have yet to see it announced anywhere and some people have the check for update function disabled in Armoury so they wouldn't know it's out. It may help some people experiencing issues. If it doesn't then don't blame me. I'm merely letting people know. 🙂

I haven't experienced issues thus far.

I posted this in the mice thread cause i'm an idiot, but:

I can confirm the Custom lighting effects now work on a Rog Claymore.

Thanks for the update Asus! Also got the KP version to 1.03.00

However, it's not a big deal but since updating Armoury to v2.04.07, the Z370-F RGB LEDs no longer light up during boot or when in bios, only once when logged into windows.

Also I did go into safe mode earlier to clean out some drivers, and going back into regular windows the Mobo RGB's refused to turn on until i had to open up aura and set a lighting profile again.

But as i said, it's not a major issue.

Marco1971 wrote:
Hi all...can't install new Armoury (event this new one) version due to follow error "Error number 0x80040707 Description: Dll function crashed: IsSupported.IsASUSMB Setup will now terminate" this on my Asus FX753VD "gaming" notebook.

Marco71.


I also have this. I can't install any armoury software to my Asus GL703VM bevause they all say this. How can I fix this?

Marco1971 wrote:
Hi all...can't install new Armoury (event this new one) version due to follow error "Error number 0x80040707 Description: Dll function crashed: IsSupported.IsASUSMB Setup will now terminate" this on my Asus FX753VD "gaming" notebook.

Marco71.


I have the same problem. It installed when I restarted to safe mode. Also my firmware is still 1.08 and it doesn't offer me an update.

AAtte wrote:
I have the same problem. It installed when I restarted to safe mode. Also my firmware is still 1.08 and it doesn't offer me an update.


Very interesting...could you describe the procedure in details to install Armoury under Windows safe mode ? MSI installer normally isn't available under that mode. Thanks.

Marco1971.

Marco1971 wrote:
Very interesting...could you describe the procedure in details to install Armoury under Windows safe mode ? MSI installer normally isn't available under that mode. Thanks.

Marco1971.


No additional tricks. The installer run normally. I booted with safe + networking.

Marco1971 wrote:
Hi all...can't install new Armoury (event this new one) version due to follow error "Error number 0x80040707 Description: Dll function crashed: IsSupported.IsASUSMB Setup will now terminate" this on my Asus FX753VD "gaming" notebook.

Marco71.


:mad: also having the exact same problem

Don't know if this was reported yet but when I setup a custom lighting profile with different effects (all static) for different keys, eventually those get wiped out and I can no longer access the custom so I can edit or add to it. For example, I set Profile 1 to be my Ark profile and I have my WASD keys static red and other keys used in the game in blue. I don't know if it's when I'm doing a software update or what, but eventually what I've done is wiped out though if I start the game, the profile I setup still works. This has happened in the latest software version and 2.04.7 I believe it was.

Windows 10, 64-bit
Armoury II v2.04.09