cancel
Showing results for 
Search instead for 
Did you mean: 

Asus Rog azoth cant pairing after update of omni reciever

Ayeball
Level 9

Hi ,

I updated my azoth after reading another thread here and after that it is unable to pair.I have tried many things. 

Pair (FN+7 or side button close the display) No sucess of seeing it in Armoury create and OMNI  Reciever tab.

Tried : Reset ( FN+ESC) 

Uninstalled Armoury create with uninstaller tool and installed it again. Full package did not work , but Armoury Crate & Aura Creator Installer Version 3.2.11.2 worked

https://rog-forum.asus.com/t5/gaming-keyboards/rog-azoth-won-t-go-into-pairing-mode-for-slot-1/td-p/...

Tried this update .And after that the pairing is brooken.

ROG AZOTH FW update 

Version 1.0.0.12

https://rog.asus.com/keyboards/keyboards/compact/rog-azoth-model/helpdesk_bios/

-------------------------------------------

Armoury Create 5.9.9.0

Rog omni Reciever framework 4.2.0.4

Asus HAL-Central App 20240923

Trying to install : ROG AZOTH Device firmware 4.00.08 but it doesnt start after pressing "OK" when i have it connected with usb mode. Tried without omni reciever connected with no sucess.

Everything works good with USB or Bluetooth connected.

Hope someone can help me or is it possible to go back to default firmware or earlier that worked well...

 

2,288 Views
33 REPLIES 33

Nate152
Moderator

Hello Ayeball

To do the update in Armoury Crate:

1) Connect the charging cable to your keyboard and a pc usb port.

2) Set the wireless switch on your keyboard to wired mode (switch set the center position).

3) Connect the wireless dongle to a pc usb port.

4) Try the update in Armoury Crate.

How does the update go?

azoth KD versions.png

azoth versions.png

 

 

 

 

 

 

 

 

Exactly thoose steps i have followed. Im in this steps ,that nothing is happening after press "OK" . 

Skärmbild 2024-11-01 001808.pngSkärmbild 2024-11-01 001835.png

After trying to pair with RF 2.4 Mode and (FN+7" and display says "Pairing" , in omni reciever in Armoury Create i go " add link keyboard " because it not shown above. But getting this after a while.

3.jpg

Nate152
Moderator

Ok, 

You may have to do the update before you can pair it, see if you can get it to update.

Try the wireless dongle and charging cable in different usb ports, you can use pc case or motherboard usb ports. Sometimes doing little things like toggling the wireless switch a few times will get it to update.

 

 

 

yes. I thought it updated to 4.00.08 Firmware before i updated the Omni Reciever that caused all thoose problems. But i see now that it is on 4.03.50 . Sound like much never version than that Armoury create says. 

I have tried all usb on the back. Thoose from Motherboard. All in front. Also tested USB C Hub with USB A slots. With no sucess with the update.

 

4.jpg

I downloaded 

Armoury Crate Gear - ROG Azoth

Version 1.0.1.4
 
Then i got it updated and it says 4.00.08 . But in that software i cant pair it . 
 
Also tested the Omni Reciever app that was in that package.Version 1.0.0.2 And it says " Dongle version 2.4 Ghz is 5.0.0.07.
 
Trying to pair in that app with both "FN+7 " And " button on the side of display ". With no sucess.

Nate152
Moderator

All you need to press is Fn + 7 to pair, no need to press the side button.

If it's still not pairing, two things I'd try:

1) Uninstall the ROG Omni Receiver and all HID Keyboard Device from device manager, then reboot.

Under "Keyboards" and "Mice and other pointing devices", right click and uninstall both ROG Omni Receiver and all HID Keyboard Device.

Try the update after rebooting.

Omni Receiver.png

If that doesn't help, try reinstalling the firmware update - ROG Azoth | Gaming keyboards|ROG - Republic of Gamers|ROG USA

 

 

 

 

 

 

I did take away all  : HID Keyboard Device , all Rog Omni Reciever both in mice and pointing and under keyboards. Restarted pc.

Reinstalled firmware update.

6.jpg

After that i started Armoury create again and choose omni reciever for pairing with no sucess. Have no updates to download and install either.

Suddently it popped out that i have update for the azoth . Did that update in " Rog Azoth app" . Didnt work to update in Armoury Crate app. When i go back to Armoury Crate is still says update to that update , that i allready have .

 

Nate152
Moderator

Ok, if you're updated then it should pair.

When pairing, make sure you have the wireless switch on the keyboard set to 2.4GHz wireless mode (not bluetooth).

Press and hold the Fn + 7 keys until it shows pairing is successful with a green check mark.

I recorded a video to give you an idea.