04-18-2023 11:38 AM
id
04-21-2023 12:22 AM
Hello, @kelynn15 .
Please refer to AURA UTILITY / FAQ and customize related RGB via ROG AURA SYNC.
Thank you.
04-23-2023 10:59 AM
I might just reinstall crate bc it has some plugins from hardware i dont have and never have had lol
Item Version
---- -------
Armoury Crate UWP App 5.4.10.0
ROG Live Service 2.0.6.0
Aura Service (Lighting Service) 3.06.20
Armoury Crate lite service 5.4.10
Aura Wallpaper Service 1.4.7.2
ASUS AIOFan HAL 1.2.0.0
ASUS AURA Extension Card HAL 1.1.0.18
ASUS AURA Motherboard HAL 1.3.9.4
ASUS Aac_GmAcc HAL 1.0.11.0
ASUS Keyboard HAL 1.2.25.0
KingstonDram 1.1.18
AURA DRAM Component 1.1.23
ENE RGB HAL 1.1.40.3
ENE_EHD_M2_HAL 1.0.10.1
PHISON HAL 1.0.9.0
Patriot Viper DRAM RGB 1.0.9.5
Patriot Viper M2 SSD RGB 1.1.0.2
Universal Holtek RGB DRAM 1.0.0.4
WD_BLACK AN1500 1.0.14.0
04-23-2023 10:50 PM
Did clean uninstall of Crate with uninstall tool, rebooted a couple of times, messed around for a few hours, shutdown, turned back on a few hours later and installed Crate fresh.
Heres the list of plugins. And still nothing about the NVLink, its still only Breathing Red, and won't sync or change from that. I have also pulled the bridge and run without for a bit and plugged back in, still doesnt see it, however SLI etc work great as soon as NVLink is plugged in it reads no problem.
Item Version
---- -------
Armoury Crate UWP App 5.4.10.0
ROG Live Service 2.0.6.0
Aura Service (Lighting Service) 3.06.20
Armoury Crate lite service 5.4.10
Aura Wallpaper Service Not installed
ASUS AIOFan HAL 1.2.0.0
ASUS AURA Extension Card HAL 1.1.0.18
ASUS AURA Motherboard HAL 1.3.9.4
ASUS Keyboard HAL 1.2.25.0
KingstonDram 1.1.18
AURA DRAM Component 1.1.23
ENE RGB HAL 1.1.40.3
ENE_EHD_M2_HAL 1.0.10.1
PHISON HAL 1.0.9.0
Patriot Viper DRAM RGB 1.0.9.5
Patriot Viper M2 SSD RGB 1.1.0.2
Universal Holtek RGB DRAM 1.0.0.4
WD_BLACK AN1500 1.0.14.0
04-26-2023 08:42 PM
Hello, @kelynn15 .
Thanks for the information.
However, RGB-NVLink is not set up with Armory Crate.
Please install the Aura Sync Utility and enter the settings as the image below.
Thank you.