I’m using some dhcp reservations instead of static assessments. Can I enter some reservations before putting the new axe7800 in control of my network. Then power down the old router and ip modem conn...
I have a single IoT 2.4 GHz "guest network" setup. Even though I've splattered ASUS all over the house the signal is poor to our IoTs just outside the house. I specifically placed a RP-AX...
I’m trying to get Link Aggregation to work between an XT9 router and a NetGate GS110EMX switch. Both devices support 802.3ad. On the XT9, in LAN | Switch Control, I enable Bonding/Link Aggreg...
Please can someone advise if I have understood this correctly. I would like to get internet access in a detached garage I plan to convert into an office in my garden. I have a Vodafone router connect...
Can someone check into why support download page for RT-AX86U is down. Its almost 3 weeks now.
https://www.asus.com/networking-iot-servers/wifi-routers/asus-gaming-routers/rt-ax86u/helpdesk_b...
Hi All, As per the title really. I am having issues setting up the 10G bast-T port as a WAN interface. When I plug the cable in, I get a random 10.xx IP address, this is not the IP address e...
Hi, Got up and running on BT Fibre 900 yesterday. Running BT Smart Hub 2 at the moment until I get workaround for the Asus issue where I get 990Mb Direct Wired into Hub and Client Speeds Of 350Mb -...
Part of the process is to extract the file then confirm the MD5 number. How do you confirm that? When I extract the file its only one file which is the firmware file to upload to the router.