©ASUSTEK COMPUTER INC. ALL RIGHTS RESERVED.

KNP · ‎05-09-2023

Hello Community, I have this monitor with a backlight problem that I'd like to revive. When the monitor is cold, only parts of the backlight lights up. After maybe 30 minutes when the monitor has ti...

1toadfacedfrump · ‎02-19-2025

As the topic asks, will this monitor get support for AC in the future please? It is not listed as a supported device on ASUS site, and of course, not in AC to control RGB on back.

Paradisej · ‎12-02-2024

Hi, to be short I am unable to set my monitor to 3840x2160 at 240hz. My configuration: Video card: ZOTAC ZT-P10810F-10P GeForce GTX 1080 Ti AMP Extreme Core Edition 11GB GDDR5X VR ...

Crasje · ‎12-01-2024

Hi, I updated my firmware on my PG34 and PG27. the PG34 went smoothly but the PG27 has a weird screen now. 1. the light below the montitor is off 2. when I take a screenshot of the sceen ...

Tybvybz · ‎08-23-2024

I just updated my monitor to the latest firmware MCM107 and now my screen looks like this. Please help !

JezZzaH · ‎07-12-2024

I have two PC''s connected to my new PG39WCDM Monitor, which I bought specifically as it has a built-in KVM. However, I cannot get the KVM switch to switch the input/output with a single button. When...

ns35 · ‎07-05-2024

Hello, can you add again MCM103 to firmware page for pg27aqdm? I need it. Thank you.

fahad3147 · ‎06-10-2024

Hello i just bought this monitor 3 days ago, i faced 3 problem 1- not saving setting: every time i restart the my pc the setting reset. 2- when i turn off pc the screen show me color ...

kolysion · ‎01-31-2024

Even with DSC OFF in the OSD, I can't enable DSR in nvidia panel. It works with my pg27aqn, but not with my pg49wcd, please fix it.

YJMalmsteen · ‎06-21-2023

Is it normal to have this thick borders for PG27AQDM? (@1440p)

PB287Q Partial backlight

Will XG27UCG-W monitor get Armoury Crate support?

Not able to use 240hz in 4K

HELP: PG27AQDM screen strange after firmware updat...

Pixels stuck on on screen PG27AQDM

PG39WCDM KVM Switch not Switching Keyboard/Mouse a...

NEED MCM103 FOR PG27AQDM

pg27aqdm not saving setting

PG49WCD with DSC OFF can't have DSR/DLDSR

Border thickness of PG27AQDM