I'm using ROG Maximus Z790 Hero in combo with Intel i9-13900KS, the latest BIOS. 1. Trying to use "Voltage/Frequency points" which are used in the process of overclocking or tuning the performa...
Hi RoG forums! Im trying to fine some temperature monitoring software. The PC Probe that comes with my Formula Z doesnt seem to work, nor when I get it off the site. Big thanks in advance -Dave
I have auto overclocking turned on for my system, and it goes as high as 38% and rarely has a problem. But because it's set to auto, sometimes it tries to go higher than 38% and I'll get a BSOD withi...
Long time no see folks!
Got this new build together and I've been riding the struggle bus trying to get a modest overclock stable.
Im honestly a bit overwhelmed with all the new settings th...
Hey ROG Fam. Decided I needed to create a separate post for the crazy RAM issues I'm experiencing with my build.
So I've been get the hang of tuning the 14900ks. While leaving memory on Auto, I've ...
Good morning. I decided to get a new computer this week, but I'm having some compatibility problems between bios and rams. I bought an Asus Rog Maximus Z790 Dark Hero motherboard and I'm usi...
Hello, I am new there (and a novice regarding hardware) I have an issue regarding Ram frequency and despite reading a lots of topics i can't figure out how to change the frequency to 3600 mhz. My ...
Hi, been trying to run these g.skill modules in a proper way, instead of the default 4800Mhz speed. I tried to activate DOCP and it immediately gets the correct settings, but then if I save the syst...
Hi I recently updated my bios from 1404 to 1604. Now I can't seem to set an offset voltage to my cpu in the BIOS. When I do nothing seem to change. Windows launch as usual and the same voltage as al...
Hello lovely Community, I recently bought an Z790 HERO but i can't figure out how to get XMP 1 working for my Corsair Vengeance 32GB (2x 16 GB) DDR5 6000MHz CL30 Dual Channel Kit (CMK...