Showing results for 
Search instead for 
Did you mean: 

Forum Posts

Saving BIOS settings?

I've been missing the option to save my changes in BIOS settings, but i can't seem to find it. Is it not an option or is this a stupid question because i can't find it? :cool:

MatG by Level 7
  • 11 replies
  • 0 kudos

Rampage V Extreme - Not TPM 2.0 Compatible? (Windows 11)

So apparently Windows 11 will require a TPM 2.0 module. Is it true X99 and therefore the Rampage V extreme doesn't support this at all? Supermicro makes a 20-pin TPM 2.0 module: https://www.supermicro.com/en/products/accessories/addon/AOM-TPM-9665V.p...

Turn off M.2?

Hi All,Is there a way I can turn my M.2 drive off, I want to install an OS on another drive and it will ruin the OS I have on the M.2 if it see's it.It's not as simple as just removing the M.2 as my graphics card is blocking me from doing so, such a ...

Jbonnett by Level 8
  • 4 replies
  • 0 kudos

SM951 M.2 Hangs Just Before Windows Boot

Guys, I'm having the same problem with freaking Samsung SM951 M.2. Please read and share your wisdom with me. Windows 8.1 64bit UEFICSM DisabledFastboot EnabledMy M.2 is the only device listed in the boot menuWhen running these settings:XMP 2BCLK: 12...

Rampage V Extreme will not boot

Hey guys looking for a SOS on this one. I got this Rampage V Extreme board/cpu/case from a guy at work. I slapped in a old hard drive I had laying around and some ram and I have been working on getting it running for the past three days after work. I...

[Strix x99 Gaming] QCODE 00 over night after several small issues

Hi!I had my new build die on me over night.I left my PC on for the night, and when I got up I found that it seemed to have been turned off.Only it wasn't. When I turned it back on, all I got was a momentary power and then shut off. After another atte...

Rampage V Extreme M.2 Setup And Windows Installation FAQ

Installing Windows isn’t exactly rocket science. Most of us have probably gone through this process more than once in our lifetime. But M.2 is a relatively new technology after all so it’s normal that some questions will arise. If you’re planning to ...

Chino by Level 15
  • 324 replies
  • 0 kudos

CPU installation tool

Really neat concept. No more bent pins. Watched a couple of YouTube videos.Will this come with the new RVE10?I noticed the guys touching the contacts on the bottom of the CPU. I thought you weren't supposed to do that. Nor the socket pins in the moth...

Hopper64 by Level 14
  • 15 replies
  • 0 kudos