hello everyone,as title says, is it possible to turn all the flashy stuff off? i can't see the display neither the red leds coming from the psu so i would rather turn them off.how can i do it, if possible?
I have a Thor1200P, and I just realized that even with the 0db button pushed in, the fans never spins. I have tried the button out and in, and there is no difference.I would prefer to have it spin all the time.Anyone else see this issue?Thanks,
I recently purchased the ROG THOR 1000w P2 and noticed after booting my pc the colors stop cycling after about 2 or 3 cycles and then stays on one color. If I lock my computer however the cycles starts again. Any suggestions on why this might be ha...
Hey all,1st time builder here and I have my PSU (thor 850) and Mobo in case and all wired up. But am waiting on the CPU and RAM. I powered it up to see if my Mobo would light up as it has Bios feedback and it did but no lights or anything from my PSU...
Hello,I decided to switch from an EVGA 850 W G2 (80 Plus Gold) power supply to an ASUS ROG THOR 850 W (80 Plus Platinium).Everything is connected correctly, the PC starts and works well in office automation, but I have the OLED screen of the ROG THOR...
My ASUS ROG G752VT-DH74 notebook bit the dust, it did not survive a cup of hot coffee across the keyboard. I have removed the memory & drives, but the power block & cables are available. I don't know how much it is worth, but worthless to me. If a...
I just bought this power supply, installed it in the case, and started plugging in the cables, to find the ARGB cables are missing (2 pin to 3 pin cable). I immediately contacted support and asked for help and was told to go buy the cable or buy the ...
So I ordered this unit, and oddly enough when the package arrived the product wasn't sealed as seen on unboxing videos, so a few weeks later i realised the power cord was nowhere to be found in the box, does this fact depend on the region the psu is ...
So I was trying to adjust the RGB colors independently in Armory Create and found that you cant, the color is directly tied to the color set on the MOBO.So here's the work around. 1. SYNC mobo to PSU.2. Change PSU to desired color.3. Unplug PSU from ...
I just installed a brand new THOR 12OOW PSU.*It’s causing the mother board LEDs to flicker even when off. The MOBO Is a MAXIMUMS Hero XIII. If I shut the LEDS off using Aura they dint flicker. So I’m not sure if it’s the PSU or driver.*The RYJIN cool...
