Gaming Routers
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

3rd Party Certs

I am looking to use a 3rd party SSL cert on the router (GT-AC5300). I see it has the capability to use certs, though I am not sure about 3rd party ones. I did find some articles for using self signed ones, but that was not my goal. I already ha...

GT-AXE11000 x2 and OpenVPN - VPN fusion doesn't do routes??

i have two identical asus GT-AXE11000 routers in two cities. I used to be able to use OpenVPN to link 2 of the older Asus routers. However, when I do the same thing on these routers (enable servers, download config files, then load them into each rou...

90291
Pupster by Level 7
  • 2582 Views
  • 4 replies
  • 1 kudos

Make Future Router Feature Suggestions Here!

Hi all,ASUS ROG is requesting our best suggestions for ROG product improvements. As a moderator I won’t have the ability to implement your suggestions but I will be picking some of the best to highlight for the ROG team so they know what matters to u...

xeromist by Moderator
  • 6378 Views
  • 50 replies
  • 5 kudos

Subnet issue

I have a very busy network so this issue causes a lot of problems for me, I'm hoping you'll all be able to help me. I have a Motorola MB8611 cable modem after activation (Xfinity) the modem/comcast changes my subnet mask to my pc  255.255.254.0 from ...

Bqtchef by Level 7
  • 167 Views
  • 4 replies
  • 0 kudos

GT-AX11000 Slow D/L speeds - Ethernet and Wireless

I have an AX11000 connected to a Netgear CM1000. My PC is built on a Crosshair Hero VIII with a 3900x.I normally get about 240mbps down and around 30 up. At some point, I started maxing out at around 30mbps down but upload speeds are normal. This ...

gyster by Level 7
  • 9391 Views
  • 4 replies
  • 0 kudos

Enabling guest networks kills 2.4ghz channel

I'm sure there is a reason or explanation but WOW, I just figured out after almost 2 years of running the GT-AX11000 that if I enable the guest channels, I lose 2.4ghz. I've spent hours and hours trying to figure out what was going on. I almost scrap...

Labels