I'm sorry to tell you that I am in the same case ... I did what I said above and in the end I have formula XII using marvel 10gb with the 2.1.21.0 driver and the firmware version 4.2.29.Now I have no way of updating or restoring the firmware to any o...
Hello,I get trouble with my Asus PCE-AC56 and my Asus RT-AC88U, in fact randomly i loose my connection for some seconds, i take a screen to show you the problem. I think the problem is my AC56 cause the routeur continu to work (see pic). It's a reall...
Hello all, i currently have this router ASUS ROG Rapture GT-AX11000. with this card installed in my pc ASUS PCE-AC88 AC3100 4x4 802.11AC PCIe Adapter. My question is if i was to upgrade to this wifi 6 card (Asus AX3000 (Pce-AX58BT) would there be a...
HelloI recently switched from Comcast to ATT fiber optic with 1 gig speeds up and down.My upload speeds are very slow compared to my download speeds.Does anyone have any suggestions as to how I can get close to 1G upload.My ROG Areion 10G card is see...
Hi Guys,I am trying to figure out this weird issue. I have the XI Apex motherboard and recently purchased the XG-C100C nic and put it in there. The NIC works great but I have this crazy problem. After I shut down for the day and come back the next...
PC A has an Asus Rampage V Extreme Edition 10 with the latest BIOS.PC B has an Aaus X399 Prime A with the latest BIOS.OS is WIndows !0 on both PCs, fully updated.My flatmate has two Asus XG-C100C 10Gb network cards connected using a CAT 6a cable. T...
Hi!I got my ROG AREION 10G bundled with my Asus ROG Zenith Extreme motherboard, and it worked fine until I installed the drivers and software that came on the USB. Now it shows up with an exclamation mark next to it as an "Ethernet Controller" in Dev...
Yea, as described, i cannot get connection on channel 120 (5,6GHz). I then cannot find routers session ID. For example there are no issues with channel 100.My router sometimes changes the channel automatically to conntect on a "better" channel, it ...
Hello everyone,First time posting here. I had purchased a very nice ROG Zenith Extreme to work with my 1950X. Everything works great, except the 10gbit NIC.I have the NIC connected via a cat6 cable to an Asus 10gbit switch. The autodetect speed is 10...
When I plug my internet cable up to the built in Ethernet connector I get 1gb speeds but when I try the ROG Areion it maxes out on 100mbpsI have tried many drivers and bios versions but this remains a problem.Any advice?*
