ROG Desktops
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

Replacing ROG G20CB Network card

Hello, my asus Rog has a really slow wifi speed compared to my other devices that share the same wifi. I've already tried pretty much everything to correct it without having to open it (including installing that old driver, that didn't change anythi...

Ram CAS latency on ROG Strix G35 Gaming Desktop PC

Hi Everyone,I recently purchased a ROG Strix G35 Gaming Desktop PC. CPU-Z shows that the CAS Latency is 22 clocks, RAS to CAS Delay 22 clocks and RAS Precharge 22 clocks.Isn't that poor for 3200Mhz DDR4 RAM? I was thinking about buying some Corsair...

G35dx ram

Hello every body*Just got a ga35 Desktop with Amd 5900x and ga35dx motherboard and 32gb of ram 3200 cl22And i wanna upgrade it to 64 or 128 the ram i would like to buy this:*Crucial Ballistix RGB 2 x 32GB, DDR4-3600*BL2K32G36C16U4BL. 1,35VBut as i wa...

Zogs313 by Level 7
  • 8 replies
  • 1 kudos

G20 with Intel 8th & 9th Gen Coffee Lake Processors

This started months ago when I opened ver.1402 G20ci Bios with MMtools. I found out that this latest G20ci bios have coffelake intel 8th gen microcode inside. Asus must be prepared for coffe lake processors with G20 intel 200 chipset, but intel didnt...

G20AJ Upgraded (RTX 2070 Super Evo)

HiJust wanted to share with saying that it's still possible to update your G20AJ with newer graphics card, such as a RTX card.Today i changed my GTX 1080 to RTX 2070 Super, with no problems and still running with default power supply. (230+180w)Just ...

Installing RTX 4080 16 GB ASUS TUF into GA35DX

Does the RTX 4080 16 GB ASUS TUF fit into the case even if you remove the front fan?This is as the front fan is already close to the current RTX 3080 10 GB ASUS TUF and the new GPU will be heftier and larger? How about the supports, will they be enou...

Agantos by Level 7
  • 1 replies
  • 1 kudos

Cannot get into Bios after adding a bios password

I have the strangest problem. I was adding an M.2 SSD. Options in the bios to change the SATA controller were greyed out. I thought it was an bios admin thing, so I added a password - just 1 2 3 4. After adding the password I found I could no lon...

Drolle by Level 7
  • 2 replies
  • 0 kudos

Resolved! 8 pin gpu cable for G20CB

So, I bought a new gpu for my G20CB but I need a new 8 to 8 pin power cable for it, as I have only a 6 to 6 pin cable and that's not enough to power it. Does it need to be a specific cable? If so, where can I buy one?