I was having issues with copying files down to my pc and with Hyper-V client internet downloads basically the speeds were close to 0.I disabled the "Recv Segment Coalescing (IPv4)" and problem fixed.Just go to device manager, right click the "Aquanti...
:I have a x299 Gaming-II and all the sudden I started getting errors in games that I had insuffienct resources. Then I notice fpsVR was only showing 8gb of RAM, where as in CPU-Z it would say 64gb. So I pulled all of my memory and tried booting...
Hi,I found the following rubber pad in the package of the Rampage VI Omega:Could you please tell me where I have to install this? I found only the following Information in the Manual:I found a pre-installed pad (it seems that it's have the same size)...
Rampage vi extreme, Bios ver 3601, Intel® Core™ i9-10940X CPU @ 3.30GHz Reinstalled Microsoft Windows 10 Home (64-bit) Version (Build) 21H2 (10.0.19044) twice, installed all windows updates, then latest chip drivers etc. Now I'm getting other device...
HelloI propose this topic to group the bios modded, it will avoid the interested person to seek the link A feedback or thanks (or thanks boutton) is always nice (and I do not like leechers) Rampage VI ExtremeBios 3006 : Cascade Lake-X microcode - ...
Hello,After updating to 0503, my Strix board died. The power shuts off after around half a second with and without the CPU installed and no other peripherals or RAM. I tried USB Bios Flashback but the process doesn't seem to start after holding the b...
New Intel Management Engine Firmware 11.12.82.1838 for X299 Release Protect Against Intel SA-00404https://www.intel.com/content/www/us/en/security-center/advisory/intel-sa-00404.htmlSolution Download File then extracting to C:\ME or any folder would ...
Why did ASUS Engineer design CMOS battery placement so badly?Do you think ROG RAMPAGE VI EXTREME CMOS battery never run out ?Only one battery replacement need more than 60 min to disassemble the ROG Armor.Please do not use these method for next ROG R...
Hi team,I recently built x4 identical PC's with the specs outlined below. They all worked fine for about two months until yesterday when one of then started showing the error code "CPU CODE: 00" on the motherboard. So 3 out of 4 PCs work without iss...
NEW ASMEDIA 3142 USB Controller HUB Firmware 210330 ReleaseDOWNLOAD LINKhttp://www.station-drivers.com/index.php/fr-ca/outils/func-download/5109/chk,de40472ade8c8595271bcaf346ad470f/no_html,1/lang,fr-ca/
