i will use this as a collection of test bioses/tools/info targeted towards Raptorlake + z69/790NOTE for Z690: You must update ME on your Z690 to properly support raptorlake (if you are on dual bioses then you need to do this to both bioses)1) d/l and...
See these security updates: https://www.bleepingcomputer.com/news/security/new-uefi-flaw-enables-pre-boot-attacks-on-motherboards-from-gigabyte-msi-asus-asrock/ Asus UEFI Advisory: https://www.asus.com/security-advisory
I see new BIOS Version 1825 dated 2025/10/28 has jut been posted for my TUF GAMING Z790-PLUS WIFI board. Asus say: 1. Improved system performance, stability, and device compatibility.2. Implemented security updates.3. Updated Management Engine (ME) ...
Hi, I just have install windows 11 and installed all drivers for my Z790 A wifi. I got this two devices without drivers:\VEN_8086&DEV_7A24&SUBSYS_88821043&REV_11\3&11583659&0&FD \VEN_8086&DEV_7A23&SUBSYS_88821043&REV_11\3&11583659&0&FC I think the fi...
I've had an Asus Z790 Hero with a 13900K for a long time. I've always had the power limit set to 150W and slightly undervolted via load line and left it there. In games, I usually had fluctuating clock speeds of 5000-5500 MHz, because the CPU is neve...
Hello. Is there anything I can do to lower the temperature of the chipset? The temperature shown in the screenshot 56C is obtained when the computer is started and running at "idle". The settings in Bios are default. No overclocking.
Hi all,ASUS is aware of the recent 1720 BIOS that was pushed by Windows Update as well as the complaints of voltage regulation. ASUS provided this update as optional but if you had a different experience please post here in as much detail as possible...
It's my new mainboard and I directly updated to BIOS 3002 because of that Intel "thing". Looks like Windows 11 won't enter S3 sleep state, it will be always S4. powercfg /a tells me that S3 is available - and only S3. I disabled hibernate and so on, ...
New board, new problems When I put Windows 11 into S3 sleep state the wakeup takes about 20 seconds. This isn't normal. Before I had a Asus board too (Dark Hero for my Ryzen) and it took only 2 seconds - I haven't changed any USB devices.What I have ...
I have update to the newest microcode. BIOS 2001. Prior version: 1801 Here is what i observe. I have been ok with 1801 SVID Behavior [Best-Case Scenario] and CPU Load-line Calibration [Level 5] HWMonitor when benchmark using R23 is around 280 Watt...
