Anyone having problems with Blu-ray playback?ProArt-Z690-CREATOR-WIFI + i9 12900KI have a GTX 1650 (My other system has a RTX 2080) on 496.76 on win 11 and tried PowerDVD and WinDVD none can play Blu-ray DVD playback is fine.
Tried to change my vcore in idle via this asus tool, when hitting apply it switched to 0.600v. Shut down.Only boots up for half a second with code 00 (apex z690).Bios flashback or cmos reset don't do anything.RIP
I just bought the Asus Maximus Extreme Z690 and for ram,*ND5U1648400BRKDE from NewEgg. On the Asus site, it shows that it supports MD5U1648400BRKDE. The only difference is the initial letter. *Are these safe? Also what’s the harm/risk in using memory...
The height of the VRM heatsink on the below motherboards is too high and the majority of Noctua and similar coolers will not fit. This is bad design by Asus.For example the ROG Strix Z690-A Gaming WiFi D4 is what I was going to buy but it will not wo...
Hello, can Asus fix this problem that i found with my new Strix Z690-A? I have a problem with the selection of the Primary Display in the bios, see picture, i am using Bios Version 0803.I have installed a RTX 3080 and i am using also the iGPU at the ...
When using AVX-512 feature e-cores disabled, there seems to be negative ratio offset of -1 during AVX-512 loads. Please give us options to disable this.ASUS TUF Z690 D4Beta BIOS 8003
My new system ASUS Z690 TUF Gaming Wifi D4 runing latest firmware with an i5 12600K under a Noctua U12S black and 64gm of Corsair timed 2133 advertised as up to 3200 cant work with XMP I or II.While ASUS auto is good for my needs as long as I use XMP...
Hey everyone, I'm having trouble with my new build. I got 12900k and z690 rog maximus extreme. I haven't been able to post after installing everything. I took the gpu out, reseated the cpu, reseated the ram. I bios flashbacked the newest bios. I cant...
I can't seem to find the setting anywhere in the BIOS. A little help would be appreciated
Is it recommened to plug in the 2 8 pin cpu connectors in too the mobo. I have just one connected, I have a HX1000i psu, just wondering since they say these new alder lake cpus are power hungry? Should I plug in another one or leave as is???Thanks in...
