In my rush to buy DDR5 memory, I didn't notice that Corsair Dominator CMT32GX5M2X5200C38 memory wasn't on the QVL list for the ASUS Z690 EXTREME.When I enable the XMP I or XMP II profiles, I get constant black screens of death. If I run stock it appe...
For a quick rundown on getting your Alderlake OC started with ROG, take a look at our OC guidehttps://drive.google.com/file/d/1KPEerrwC-KB7-00m21_bopSE_qzCVXK3/view?usp=sharingTeam ROG
Does anyone happen to know if all the M.2 slots on the Hero motherboard and Hyper M.2 Card are compatible with double-sided NVME SSDs?
I have a Maximus Hero, Graphics Card and 2 M.2 PCIEx 4.0 drivesIs there anyway to install these where they all are on the CPU PCIEx Lanes? It looks like whether I use the Hyper M.2 card or the M.2_2 or M.2_3 slots that my second M.2 will be on the ...
Hi, I have an 12900k with ROG Strix z690 F and Kingston Fury 5200 mhz 16x2 DDR5 memory. If I try to active XMP for 5200mhz, the pc can't boot, and I have to reset the bios and put stock values to be able to use my PC. Anyone knows how to fix it?
So the BIOS and pre-Windows everything does not appear when the monitor is plugged into my video card. The white VGA light shines. But it comes to life with Windows and works fine after that, though the VGA light on the motherboard stays on.I have to...
I updated a bios for this board from the support page and now need to get the WiFi driver but nothing is showing up for this board no drivers no bios's no apps no nothing, Why has it been taken down?
Hi hope someone can awnser this questionI understand that the two PCI-E slots would run at x8/x8 and have a RAID card in one PCI Express® 3.0 and RTX2080 PCI Express® 3.0 in the other but what I would like to know is if down the road I get a new GPU ...
What is Optimem II and Optimem III?Is that only for Daisy Chain layouts? Speaking of which, are all the Asus Z690 boards daisy chain for RAM? Does Optimem make it as stable on 4 sticks as on 2?
ROG SupremeFX ALC4082 with ESS ES9018Q2C DACWith this DAC/amp, is it similar to older boards that it is only Inuse when headphones are plugged into the front panel, or is it also active and used for the rear ports?
