HelIo,I had made a post awhile back about frequent crashes, thankfully @STARRAIN helped me out, much appreciated btw.That issue was since fixed, I swapped my SSD to a different port and all was good for quite some time. Roughly about 2-4 months ago I...
When gaming the ethernet adapter freezes for a couple of seconds making the experience unplayable. If I use wifi this does not happen. I've tried both I226 ethernet drivers versions 1.1.3.28 and 2.1.1.14 with no success. Is the adapter that comes wit...
Trying to identify which sensors these correspond to as I couldn't find the information in the manual. Temp sensors TMPIN8, AUXTIN2, and AUXTIN4 in HWMonitor hitting 127C also AUXTIN0, TMPIN6 and TMPIN4 are always 0.While the ones at 0C are always a...
I need to know which Bios has the option to switch to Microcode to 104 for the board in question. Version 1205 is installed and it would help me to know if 1220, 1402 or 1601 offer this option. @Silent_Scone maybe you can help me, I saw your thread o...
SPECS:Asus ROG MAXIMUS Z690 FORMULA (Bios 1505)T Force 16gbx4 6400MHz Ram SticksIntel 12th Gen 12900K(a big newbie here so I am pretty sure that's all that matters in this scenario if not let me know and I will update)The current settings are not any...
Hi,I have just finished the built of my new setup (Strix z790-E + 13900K). I am very stonished to see that Fan Xpert 4 in no more included within the AISuite software. It seems that it is mandatory to install Asus Armoury Crate in order to be able to...
Hi all,I am having difficulty setting up custom BIOS boot Logo.When I chose a pic for Logo and click update, it gives an error "Temp File C:\Program Ciles (x86)ASUS\AI Suite III\EZ UPdate\Output.cap Create Failed.."I tried to re-install Windows 1...
Hello all,i have here shared my set-up https://valid.x86.fr/xqy5xy, now after bios update to the last verision im facing a lot of problems on stability of my ram, also 4800 are impossible to use seems right now.Any suggest? With the previous bios i w...
This tool seems to do nothing when I try to update with it. I still have the same Cypress PD FW Version of 100F after using it. Am I doing something incorrectly here?
Hi Everyone!I noticed after i installed Windows 10 (and i tried windows 11 previously as well and the same thing happens), that in device manager, the RAID Controller has a yellow icon and exclamation mark. As if it's not installed properly and it ca...
