Z590-A Strix Gaming Wifi - How set pre-boot ddr4 voltage?
Trying to figure out how to set the pre boot voltages for the ddr4 ram? All I can find is settings for vccio and vccsa and other voltages except ddr4 vram voltages. Thanks
Trying to figure out how to set the pre boot voltages for the ddr4 ram? All I can find is settings for vccio and vccsa and other voltages except ddr4 vram voltages. Thanks
I currently have an X870E Hero, a 9950x3d, a 4090 GPU and 3x M.2 Drives (Gen5, Gen4 and a Gen3) they are plugged into M.2_1, M.2_4 and M.2_5 and am getting x16 on the 4090 in GPU-Z. The question I have is if I swap out the 4090 for a 5090, based on m...
hello. Please provide info which USB ports goes directly to cpy with by-pass any controller?
Hello. After the computer has been running for 1 month after a new build, the Q-Led VGA light is constantly on after a reset. If you turn the computer off and then on, the Q-Led light goes out. I have tried different DP cables, I have disassembled an...
i have Z590F motherboard when i turn on cold boot bios settings all going to defualt but time is correct and after i check this like waiting 6 to 10 hours bios not reset but i keep pc off like more than 20 hours it happens any one can help ? (and als...
I can't change the memory to run at 6000. I have Asus Strix x670e-e gaming mother board, CORSAIR Dominator Titanium 64GB (2 x 32GB) DDR5 6000 (PC5 48000) Desktop Memory Model CMP64GX5M2B6000Z30 and AMD Ryzen 7 9800X3D. Just installed this setup and a...
I9-12900K (stock) Z690-F motherboard (stock) (3701) DDR5 @ 4800 (stock) RTX 3080ti Corsair HX1000W PSU Samsung 970 & 980 Pro NVME Windows 10 Professional (latest) =========================== I have done a fresh install of Windows without installing a...
I noticed ASUS published a new BIOS - 3603 for the Strix Z690 series, and I was wondering if anybody has had any problems with all the Intel defaults it provides. My rig has been rock solid with all of the BIOS(s) up to and including BIOS 3501. I'...
My ethernet controller status used to show as "Connected" in the BIOS but recently, it has not.The Ethernet works fine within Windows 10 but I need it to be connected in the BIOS before I boot to Windows.All LAN / Network Stack configuration options ...
Hello, My PC won't turn on after cleaning it with air. It stay's at DRAM Led so i checked if one of the two sticks might be the problem but it turned out that the fourth ram slot isn't working. Now i have to put it in slot 1 and 3 instead of recommen...