cancel
Showing results for 
Search instead for 
Did you mean: 

[FIRMWARE] Intel ME (H510/B560/H570/Z590)

MoKiChU
Level 40

Hi everyone,

- Intel ME Consumer Firmware :

Firmware : 15.0.47.2521 [15/10/2023]
PMC Firmware : 150.2.10.1020 [17/02/2022]
PCHC Firmware : 15.0.0.1021 [28/04/2021]
PHY Firmware : 12.14.215.2015 [25/08/2021]
Download : Link

Check/Update Process :

Check current version : Right click on "Check.cmd" > Run as administrator

Install/Update : Right click on "Install.cmd" > Run as administrator > Automatic restart when install is done


OS requirements : Windows 10 64 bit or more recent.
Hardware requirements : Motherboards with Intel H510/B560/H570/Z590 chipset.

66,794 Views
98 REPLIES 98

MoKiChU
Level 40

Hi everyone,

- Intel ME Consumer Firmware :

Firmware : 15.0.30.1716 [24/03/2021]
PMC Firmware : 150.2.10.1015 [19/04/2021]
PCHC Firmware : 15.0.0.1020 [05/03/2021]
PHY Firmware : 12.14.212.2012 [08/01/2021]


Thread updated.

kvarq
Level 11
Is this security related?
In general I noticed during time installing these kind of firmware updates 99% times I lost performance.

MoKiChU
Level 40

Hi everyone,

- Intel ME Consumer Firmware :

Firmware : 15.0.30.1792 [06/05/2021]
PMC Firmware : 150.2.10.1017 [05/05/2021]
PCHC Firmware : 15.0.0.1020 [05/03/2021]
PHY Firmware : 12.14.212.2012 [08/01/2021]


Thread updated.

MoKiChU
Level 40

Hi everyone,

- Intel ME Consumer Firmware :

Firmware : 15.0.30.1792 [06/05/2021]
PMC Firmware : 150.2.10.1017 [05/05/2021]
PCHC Firmware : 15.0.0.1020 [05/03/2021]
PHY Firmware : 12.14.214.2014 [01/04/2021]


Thread updated.

Zardoc
Level 10

bayfront_benny
Level 9
MoKiChU wrote:
Hi everyone,

- Intel ME Consumer Firmware :
Firmware : 15.0.30.1792 [06/05/2021]
Firmware PMC : 150.2.10.1017 [05/05/2021]
Firmware PCHC : 15.0.0.1020 [05/03/2021]
Firmware PHY : 12.14.214.2014 [01/04/2021]
Download : Link





OS requirements : Windows 10 64 bit.
Hardware requirements : Motherboards with Intel Z590 chipset.


Went without a hitch

MoKiChU
Level 40

Hi everyone,

- Intel ME Consumer Firmware :

Firmware : 15.0.30.1792 [06/05/2021]
PMC Firmware : 150.2.10.1017 [05/05/2021]
PCHC Firmware : 15.0.0.1021 [28/04/2021]
PHY Firmware : 12.14.214.2014 [01/04/2021]


Thread updated.

MoKiChU wrote:
Hi everyone,

- Intel ME Consumer Firmware :
Firmware : 15.0.30.1792 [06/05/2021]
Firmware PMC : 150.2.10.1017 [05/05/2021]
Firmware PCHC : 15.0.0.1021 [28/04/2021]
Firmware PHY : 12.14.214.2014 [01/04/2021]
Download : Link



Thread updated.



Hi I have a z590 apex motherboard and I installed this on it when I got it now. I can't get into the bios anymore. And if I clear cmos I need to replace the bios inorder for the pc to.boot back to windows. It skips the bios boot screen and doesn't allow me to get into the bios even if I select it when restarting from windows. Is there a fix for this would be greatly appreciated thanks

kvarq
Level 11
99% of the times the FW updates are security oriented, and in general the performance is crippled
I learned the hard way during time this - I still remember with Apex Z390 board, out of boredom I did a FW update, and then I noticed loss of performance in all synthetic tests and most important, in games!
and once the FW is updated, going back is virtually impossible
so I'm leaving the FW default from now on... unless they will issue one for performance, which is unlikely... if FW is constantly updated, 1-2% at least lost every time... forced somehow to "upgrade" to the next generation and so on... 🙂

just posted on another thread:
Silent Scone@ROG wrote:
Hello,

Obviously this will depend on the changes between UEFI builds. The consensus, unfortunately, over the last couple of years is that performance is worse due to the barrage of ucode security updates that had a negative impact on certain workload performance. These have plateaued at this stage, so most changes to the firmware will likely bring stability improvements.

Zardoc
Level 10
Firmwares should have detailed notes.

You get a bunch of updates thrown at you and it's never a done deal that they won't cause issues. A rollback option and details about the updates would be really appreciated.
You pay good money for your product. You don't want it crippled after the first update.

That's exactly what I was talking about concerning Realtek USB sound drivers. The sound is fine (well except for the digital output issue) but the loading on boot takes more than 10 seconds looping on Windows load. There's also a short delay before sound reacts.

No notes from Asus, Nothing on Realtek site either. 😞