cancel
Showing results for 
Search instead for 
Did you mean: 

[FIRMWARE] Intel ME (H470/Z490)

MoKiChU
Level 40

Hi everyone,

- Intel ME Consumer Firmware :

Firmware : 14.1.72.2287 [24/06/2023]
PMC Firmware : 140.2.01.1018 [22/02/2021]
PCHC Firmware : 14.0.0.7002 [12/06/2020]
PHY Firmware : 12.14.215.2015 [25/08/2021]
Download : Link

Check/Update Process :

Check current version : Right click on "Check.cmd" > Run as administrator

Install/Update : Right click on "Install.cmd" > Run as administrator > Automatic restart when install is done


OS requirements : Windows 10 64 bit or more recent.
Hardware requirements : Motherboards with Intel H470/Z490 chipset.

562 Views
234 REPLIES 234

Tekamine wrote:
@itsnice4u, which bios you are on atm ? wich mobo as well please ?

I have a Formula XII and a 2601 Bios, with the 1969 firmware. I am experiencing a triple boot issue since I've updated the Bios from 2409 to 2601, the 1969 firmware being already installed when I flashed.

I will give a shot to update to the new one. Just hoping it won't provoke any boot loop issues...

I ll keep you updated, especially concerning the bios section such as TjMax and FCLK frequencies.



No problem here on Asus Formula XII, bios 2601 and firmware 14.1.65.1990.

Tekamine wrote:
@itsnice4u, which bios you are on atm ? wich mobo as well please ?

I have a Formula XII and a 2601 Bios, with the 1969 firmware. I am experiencing a triple boot issue since I've updated the Bios from 2409 to 2601, the 1969 firmware being already installed when I flashed.

I will give a shot to update to the new one. Just hoping it won't provoke any boot loop issues...

I ll keep you updated, especially concerning the bios section such as TjMax and FCLK frequencies.


I have Asus Formula XII bios 2601 with firmware 14.1.65.1990 now, after updated from 14.1.65.1969 to 14.1.65.1990, the double boot(Qcode 19) issue was cleared. I tried to change TJMAX several times with different value, and It did'nt affect other overlock settings any more, for FCLK change. I think It would be cleared too but I didn't try.

itsnice4u
Level 8
I have Asus Formula XII bios 2601 with firmware 14.1.65.1990 now, after updated from 14.1.65.1969 to 14.1.65.1990, the double boot(Qcode 19) issue was cleared. I tried to change TJMAX several times with different value, and It did'nt affect other overlock settings any more, for FCLK change. I think It would be cleared too but I didn't try.

Fr0stX
Level 7
Maximus XII Formula

Bios 2403

14.1.65.1990 fixed the double boot Code 19 and TJMAX boot loop if set to anything but auto

Thanks Mokichu!
I7-10700K @5.0Ghz
Asus Maximus Formula XII
32Gb Gskill Royal-Z @3600Mhz
Asus Strix RTX3090
Corsair HX850i

Yuniel
Level 10
Maximus XII Formula
Bios 2601
update firmware from 14.1.53.1649 to 14.1.65.1990 , no issue

Thank you for your feedback guys !

And thank you, of course, to Mokichu. Awesome Job, you should get rewarded by Asus seriously :cool:

Edit : updated successfully, I have a tiny double boot (attempt to boot during half a sec, turning off and booting again), but it is still better than triple booting from the later one.
No issues so far with the BIOS, changed the Tjmax, and other options that were "blocked" before.
Now I have to test if OCing the BCLK is possible from the Bios.

Anyway, thank you Mokichu ! Is it physically possible, in your opinion, to upgrade the Z490 on the 15.1.XXXX versions, or is it strictly reserved for the Z590 boards ? (out of curiousity).

Thanks !

Yuniel
Level 10
wrong thread

MoKiChU
Level 40
Tekamine wrote:
Anyway, thank you Mokichu ! Is it physically possible, in your opinion, to upgrade the Z490 on the 15.1.XXXX versions, or is it strictly reserved for the Z590 boards ? (out of curiousity).

Thanks !


Hi,

No, it's not possible, and even if it were possible there would be no interest/gain in doing so.

GettnBetter
Level 9
This latest ME firmware fixed my issue with a Z490-E Gaming mobo. I updated to the 2601 firmware also. Everything working perfect again!

GettnBetter wrote:
This latest ME firmware fixed my issue with a Z490-E Gaming mobo. I updated to the 2601 firmware also. Everything working perfect again!


yeap 14.1.65.1990 firmware and 2601 bios work perfect , no security problem and no bootloop 😉 , the only problem is after update the bios have to set up again the fans curves , XMP lol but i made a video before reset the bios to know how i have it before the update 🙂