[DRIVERS] Intel Chipset/MEI/SATA (1xx/2xx/3xx/4xx/5xx)

[MoKiChU]

Hi everyone,

- Intel Chipset Drivers :

Package : 10.1.19913.8607 WHQL [09/07/2024]

Download : Link

Install/Update Process :

Launch "CHIPSET_Intel_vxx.x.xxxxx.xxxx.exe"

- Intel MEI Drivers (Drivers Only) :

Drivers : 2433.6.3.0 WHQL [15/08/2024]

DAL SoftwareComponent Driver : 1.46.2024.221 WHQL [31/03/2024]
ICLS SoftwareComponent Driver : 1.73.132.0 WHQL [25/04/2024]
WMI SoftwareComponent Driver : 2428.6.4.0 WHQL [10/07/2024]

Download : Link

Install/Update Process :

Launch "Install.cmd" by right-click Run as admin > Automatic restart when install is done

- Intel SATA AHCI-RAID Drivers (Drivers Only) :

Drivers - 4xx/5xx : 18.37.7.1013 WHQL [06/02/2023]
Drivers - 2xx/3xx : 17.11.3.1010 WHQL [25/11/2022]
Drivers - 1xx : 16.8.5.1014 WHQL [13/12/2022]
Download - 4xx/5xx : Link
Download - 2xx/3xx : Link
Download - 1xx : Link

Install/Update Process :

- Press Windows key + X > Device Manager > Right-click on your Intel SATA device > Update driver > Browse my computer for driver software
- Browse... > Select the extracted drivers folder (SATA_AHCI-RAID_Intel_v...) > Next

OS requirements : Windows 10 64 bit or more recent.
Hardware requirements : Motherboards with Intel 1xx/2xx/3xx/4xx/5xx series chipsets (except Intel X299 chipset).

TIPS :

If you want to manage the drivers (remove old/unused drivers for example) that you have in your Windows DriverStore
Use Driver Store Explorer (Right click on "Rapr.exe" > Run as administrator).

If you want better interrupts delivery latency
Enable MSI (Message Signaled-based Interrupts) mode on all your supported devices (see the column "supported modes") with
MSI Mode Utility (Right click on "MSI_Mode_Utility_v3.exe" > Run as administrator).

[MoKiChU]

Hi everyone,

- ICLS SoftwareComponent Driver have been updated for this drivers package :

MoKiChU wrote:
- Intel MEI Drivers (Drivers Only) :

Drivers : 2345.5.3.0 WHQL [08/11/2023]​

Thread, post & drivers package updated.

[Wingclip]

Hi MoKiChU,

I only recently became aware of your very helpful links. Even though I’ve been building my own desktop computers for well over 10 years, my IT “IQ” is abysmal. I get easily confused by many of the abbreviated terms and condensed instructions.

My initial goal was to update the motherboard’s BIOS to version 2801. However, I found out that I’ve been probably making previous BIOS updates incorrectly.

After some careful reading, I should apparently first install the latest ME Tool Update and then I should update the ME Firmware. Only after I complete that process should I update the BIOS version.

As a result of what I read, I found out about your subscription and have subscribed to your info. But I have a few questions regarding the link & information you provided on your page “[FIRMWARE] Intel ME (H470/Z490)”.

Before I forget, the following is a short list of my presently installed OS & hardware (Liquid cooled, of course):

OS: Windows 10 Pro 64bit / MOBO: ASUS Z490 ROG Maximus XII Formula / CPU: Intel i9–11900K / GPU: GeForce RTX-3080 Ti / RAM: T-Force XTreem 32GB x 3600MHz / PSU: EVGA Supernova 1300G2 1300W 

Last night, I went to your page “[FIRMWARE] Intel ME (H470/Z490)”, which referred to this:

Intel ME Consumer Firmware: Firmware: 14.1.72.2287 [24/06/2023]

The instructions that were included on that page said:

“Check/Update Process: Right click on "Check.cmd" > Run as administrator.” 

So, I clicked on the Download Link and downloaded the zip-folder. Then, after I unzipped the folder, I R-clicked the “Check.cmd” file and Ran it as Administrator. But I received no response to indicate anything about the firmware version I had.

In fact, I received no response at all. Was I supposed to see something open to show me my presently-installed firmware version?

I haven’t tried to install the firmware yet because I want to be sure of what I was supposed see when I ran the “Check.cmd”.

Thanks again for your help and contributions!

Rich

PS Apparently you can't reply for whatever reason, so can someone who reads this answer the question?

[MoKiChU]

Hi everyone,

- WMI SoftwareComponent Driver have been updated for this drivers package :

MoKiChU wrote:
- Intel MEI Drivers (Drivers Only) :

Drivers : 2345.5.3.0 WHQL [08/11/2023]​

Thread, post & drivers package updated.

[djsolidsnake86]

installation do nothing

[MoKiChU]

Hi,

Move the drivers package to another location (for example in your Desktop) than where you are currently launching it from.

[JohnAb]

It worked fine for me thanks, so nothing wrong with the file - Driver Store Explorer shows the correct updated WMI driver

[djsolidsnake86]

worked, thanks

maybe is useful add this trick to the first post

[MrAgapiGC]

Just add it to my wife z390 no issues as always thanks. She is happy and no screaming.... jejej thanks! i will keep monitoring her old system as always. I have try to change it be she refuse to. super weekend

[djsolidsnake86]

sorry, I'm not talking nonsense, for me this latest version doesn't currently install, I restarted the PC, re-downloaded the file, clicked run administrator on the cmd but nothing happens

[MoKiChU]

Hi everyone,

- Intel MEI Drivers (Drivers Only) :

Drivers : 2406.5.5.0 WHQL [08/02/2024]

DAL SoftwareComponent Driver : 1.46.2024.221 WHQL [31/03/2024]
ICLS SoftwareComponent Driver : 1.71.99.0 WHQL [06/12/2023]
WMI SoftwareComponent Driver : 2353.5.2.0 WHQL [31/12/2023]

Thread updated.