Hi
another project Build
Snef
**Red Poseidon**but this will be a little bit longer project, heuu in think :blahblah:
Parts list
HardwareCpu: Intel I7 3770k:
*Received*Motherboard: Asus Maximus V Extreme:
*Received*Mem: 16 Gb (4x4)Corsair Dominator GT 2133:
*Received*GPU: 2 x HD7970 reference:
*Received*Case: LD PC-V4 TestBench:
*Received*PSU: Silverstone ST1500:
*Received*SSD: OCZ vertex 4 256Gb:
*Received*Hdd: 3 x WD 500Gb Black 7200trm 2.5” drive in raid 0:
*Received*CoolingFan: 12 x Corsair SP120 hp white:
*Received*Fan Controller: Lamptron touch:
Need To OrderCPU Block: EK Supremacy (CSQ) Plexi Nickel (polish):
*Received*Ram Block: EK Ram CSP plexi nickel (polish):
*Received*GPU: 2 x EK-FC7970 CSQ Plexi Nickel (polish):
*Received*GPU: EK-FC7970 Backplate white:
*Received*Rad: 2 x XSPC EX360 multiport:
*Received*Reservoir: EK-Multioption X3 RES 400 with white top and bottom:
*Received*Pump: D5 Vario:
*Received*Pump top: EK-D5 X-TOP CSQ - WHITE Acetal:
*Received*Tubing: Primochill Advanced LRT Clear 3/8” – 5/8”:
*Received*Fittings: Bitspower compression fitting, angle and spacer all white, Koolance QDC (silver or black not sure now):
Need To OrderCoolant: EK Coolant Blood Red:
*Received*Thermal paste: MX-4 and Gelid (EK):
*Received*ModSleeving: Darkside White and Red 2mm, 4mm and 10mm Sleeving
*2mm and 4mm Received* Need To Order 10mmConnector: all white connector:
*Received*White, Black and Red paint:
*Received*Full White, Red and Black Sticker:
*Received*Red and black screw, and thumb screw:
*Received*And more, inspiration will come in the building process
anyway for now its only a Teaser
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Nahhhhhh, its not just a teaser, I have more pics :ass:
i'm still in panning mode and need to chose coolant/sleeving mode
my sleeving will be white with red accent
----------------------------------------------------------------------------------------------------
little work on fan
I want to know the result of little idea I have in my head with the fan and I think the results is really great
Corsair need to release these fan in white
what do you think?
----------------------------------------------------------------------------------------------------
start painting
first phase backplate, little plate on waterblock and power supply
sorry for the pics but I will not bring my camera in my paint booth lolllll :lawl:
second phase will be , motherboard block, icy dock, cpu block with plastidip
and third and final phase will be , Aquaeroe 5 (plasti dip), reservoir support, fan screw and other little thing with primer and real paint
Update:
some items are now painted
First Fannblade case Feet:
WOW! they are nice
and these feet is a must on all build/mods
I painted my CPU waterblock
and a way better than black for my Red Poseidon, imagine with red coolant, again WOW
and finally, GPU backplate, they will be install wirh red screw
--------------------------------------------------------------------------------------------------
Update:
first
i want to Give a big
***FAIL*** to EK
i tried in 2 diferent case and same thing (caselabs M8 and LD PC-V4)
i cant lock the gpu in PCIe slot because the block on GPU sit on Motherboard water block screw......serious??????? why not use the same screw as the plate on GPU (Flat head screw)
pics
and same thing for the second card lolll
i dont have tools to modify tu use flat head screw
anyway
go to Update
some pics
Last Update for this week, need return working on the road for a couple of weeks
i know, no rad are installed but wnat to do a leak test becaus i splited all waterblock and want to be sure no block leak
next steps,
painting 9 more fans
painting 2 x 360 rad
cable management
installing fan and rad
real leak test and done
more update soon
Thanks