cancel
Showing results for 
Search instead for 
Did you mean: 

Watercooling build

cimbri
Level 9
Hi to all. First of all english is not my native language. I hope i m posting in proper section.
I need advice. I spend a lot of time on internet finding proper cooling system. But no luck. Dont understand most of fittings. What im trying to do is to build custom case with W/C.
My configuration is formula IV with AMD 1090T kingston 4x4 gb. Asus strix 470. If some can made me list what do i need. Beside this should i go with tubes or pipes.
Tnx.
2,642 Views
5 REPLIES 5

Zka17
Level 16
You may start here: https://www.ekwb.com/custom-loop-configurator/
Tubes or pipes - has no relevance for performance, it's just esthetics...

Zka17 wrote:
You may start here: https://www.ekwb.com/custom-loop-configurator/
Tubes or pipes - has no relevance for performance, it's just esthetics...


Tnx

Menthol
Level 14
I have never used hard tubing myself, it looks better but is more difficult to build, you may be spending more for cooling than the cost of your system

Menthol wrote:
I have never used hard tubing myself, it looks better but is more difficult to build, you may be spending more for cooling than the cost of your system


Tnx for info

ottoyu34
Level 9
Your system case will determine what size of radiator you can install, there are different thickness of radiator so you have to make sure the combined thickness with 25mm fans will clear any system components.

Waterblock is pretty self-explanatory, you will have get one that is compatliable with your socket.

FIttings is all about outer and inner diameter.