cancel
Showing results for 
Search instead for 
Did you mean: 

ROG "Red Scorpion"

Ntwlf
Level 12
Welcome fellow ROG'ers...and Thanks for stopping in.

I present to you "my best" build to-date.

56738

What is the reason for doing a new build?...Hmm...Well, isn't it the "same" for most everyone choosing to do a new build?
You might answer with something along these lines...
The current one has been upgraded/overhauled as far as it will go, and I can't play this new game "insert here".

So......we gotta build a new one!


But first I want to give a BIG "Thank You" to all the ROG'ers here on rog.asus/forums. I'll elaborate as to why I'm thanking all of you. It was back during the winter of 2014/2015 when I decided to do a new build. Because my old build was hitting 10 years old, so you can imagine how slow it was getting compared to today's tech. Now I had the difficult task of selecting all the components to make the build. It has been a few years since I payed any attention as to what was going on in the tech industry, therefore a lot of research was needed in order to have a balance between all the components inter-working with each other, such as not having bottle-necks of data throughput between components. The first task was deciding on which of the top tier manufacturers to choose a motherboard from, of course a processor is needed as well since it goes hand-in-hand with the motherboard, so I had decided upon the "Devil's Canyon" Intel i7-4790K. So I pick out a motherboard or two from each board maker and read reviews on each, noting the pro's and con's to narrow down the list. Then I move on to the forums of each board maker and read the members posts and replies as well as noting the whole feel of the forum, such as how comfortable it would be in posting a question or problem to what kind of replies one would receive. Would I feel at home? Or would I get smart remarks in the replies or something to the like? Well you should have guessed the "Winner" by now, huh. I find the members here to be a fine group of people with everyone doing their best to help another ROG'er. So I applaud all of you and am thankful of being a member of such a fine community.

There's one more person in your ranks that I'd like to Thank publicly as well, and that would be NATE152. Many of you know him, as he has helped countless people here on the forums. Nate152 and I have quickly become friends not long after I joined the community. He has been a big help in choosing some of the components of my build, pointing out potential issues and soon will be helping me tune it all in and overclock it into a formidable beast.

Now that a motherboard has been chosen, the rest kind of falls into place.

So lets start with the list of components...


motherboard: ASUS Maximus VII Formula
Processor: Intel i-7 4790K (purchased from siliconlottery.com , binned at 4.8 GHz)
Memory:
32GB G.Skill TridentX F3-2400C10Q-32GTX
Graphics Card /'s: (2x) ASUS Strix GTX 980 Ti OC (w/ ROG Enthusiast 2-way SLI Bridge)
Storage:
(1x) SanDisk Extreme Pro 240GB SSD (
for initial OS installation & testing phase before imaging to 960GB ssd)
............. (2x) SanDisk Extreme Pro 960GB SSD (
one is for OS, other Games)
............. (2x) Seagate Barracuda 7200rpm 1TB ST1000DM003 HDD (set in "Raid 0" for everything else)
............. (1x) Seagate Desktop 5900rpm 4TB ST4000DM000 HDD (internal - back-up & imaging)
ODD:
ASUS Blu-Ray Writer BW-16D1HT
CPU Cooler: Cryorig R1 Ultimate (w/ Red Heatsink Covers purchased in addition to)
Case:
Cooler Master Storm Trooper w/ Windowed Side Panel (same as available on the Storm Stryker)
Fans:
(9x) Thermaltake Riing "Red"
........ (2x) Lepa Chopper "Red" (for front case grille lighting affects only)
Other:
ASUS ROG Front Base Dual-bay Gaming Panel
..........NZXT IU01Case Accessory (USB 2.0 Hub - internal to case as add-on)
OS: Windows 7 Ultimate (w/ XP in VM for older games)
PSU: Corsair AX860i (w/ Corsair "Red" Braided Cables purchased in addition to)

Now I have saved the "PSU" for last in the list above so as to explain, because there's a reason I still have it in the build. It had been purchased early last year (2015) with the intent of going with lesser gpu's (GTX980's). I know 860 watts is a bit tight for 2x Strix 980 Ti's, so I'll be watching/monitoring very closely as to how hard the psu is going to be stressed (Corsair Link software and a Kill-A-Watt Meter). I may make a Post here on the forums as to the success/failure of the Corsair AX860i and 2x Strix 980 Ti's, if anyone has an interest. Otherwise it will be noted here in the build log as to whether I need to upgrade it or not.


Just for fun, I thought I'd make this a story/picture show and explain how I came up with this selection of components. To start, I had originally planned a budget for the build, no particular number, just not get carried away. But after a while I got to thinking, "If I get this component now when I prefer that one instead, later I'll have wished to have saved up a little longer and get the one I really want.". So the budget had gotten tossed out the window. This is going to be an investment, so lets not have any regrets.

And without further adieu, here's the pictures you've been waiting to see.
So . . . pull up a mouse and scroll awhile.


They are coming...soon...I promise.


I had originally decided on using the Maximus VII Hero mobo, but I liked the Formula better, but was concerned somewhat with the combo air/water cooler/heatsink on the VRM's. Would the VRM's stay cool enough on air alone? After all there is an empty space inside when on air alone. Then I happened upon www.siliconlottery.com from research and reading over at www.overclock.net . Their binning setup for 1150 socket-ed cpu's was using the Formula with only a AIO Cooler for the cpu, everything else on air. So I contacted siliconlottery and asked them about the VRM temps. They replied back stating, their not experiencing any problems, the temps are fine. Cool...(pun intended), so I got the Maximus VII Formula.

While I was in contact with siliconlottery, I put in an order for their i7-4790K binned @4.8GHz with their De-lidding service added. For those whom hasn't heard of de-lidding, the IHS (Integrated Heat Spreader, the silvery metal plate on top) is forcefully removed from the cpu exposing the die underneath. Then the Stock Intel TIM (Thermal Interface Material) is removed and replaced with a much better TIM, which is Collaboratory Liquid Ultra. The de-lidding process is expected to lower the cpu temps by 10° C. from stock. This can be considered the first "MOD" to the build. Here's a couple of links providing much more info. http://www.guru3d.com/articles_pages/core_i7_4790k_processor_5_ghz_review_a_silicon_lottery,1.html,http://www.overclock.net/t/1313179/official-delidded-club-guide.

The 32GB G.Skill Trident X Series memory kit was chosen for trying out the RamDisk software bundled with the motherboard. Also, the top heat spreader bar is removable should there be interference with the cpu cooler, and it's "Red".

The ROG Front Base Panel? Well... it just looks so cool, as an addition.

56159

The only thing to add here beyond what was already said to the Strix 980 Ti's, is that the color scheme is perfect.
Those of you interested in getting the ROG Enthusiast SLI Bridges or think they are to expensive, I would say to regularly check ebay.com. The prices do fluctuate. I had been keeping an eye out for them for quite a while. I snagged the 2-way for $34.53 shipped from "beachaudio".

56173

Ahh, more color matching, even the label on the PSU. I left the cables that came with the PSU out of the pic showing only the Corsair Sleeved Cables purchased separately.

56174

One can never have to much storage. I was considering Samsung 850 Pro's as well for SSD's. But after considerable research, I decided on the SanDisk Extreme Pro's. It's performance is on par with the Samsung 850 Pro's, but in some measurements the SanDisk exceeds Samsung by a small margin. Also the SanDisk has a portion of it's capacity unavailable to the OS, so as to enhance wear leveling thus increasing longevity. This explains the odd capacity numbers, SanDisk Extreme Pro 960GB vs Samsung 850 Pro 1TB. 1TB is usually considered as 1000GB.

I have only used Seagate Barracuda Drives and haven't had any problems to note, so I stayed with them.

56175

My only experience with Blu-Ray is seeing a display setup, playing some movie at Wal-Mart. Haha, I bet that's funny. So I decided on this one, it will be the first Blu-Ray drive in the house (still is). I also picked up the "Fast & Furious Blu-Ray 6-Movie Collection" while I was at Wal-Mart, am still waiting to watch it.

56176

I think the CPU cooler is a beauty compared to it's contender, the Noctua NH-D15 and a very small number of other air coolers. The reviews show them performing almost identically, or at least close enough to choose the one you like best for top of the line air cooling. Cryorig also has heatsink covers available in a few other colors (purchased separately) besides the standard black, as you see in the pic. Guess what? Red is one of the colors available.

56177

I'm still amazed at having a carry handle on top of a case, that was the attention grabbing thing for me. Plus the top sort of resembles the engine hatch on a Lamborghini Countach. Anyways, you'll notice the box shows a non-windowed side panel, that is actually designed for (2) 120mm fans that set adjacent to the gpu's inside. This is the "Original Model", however when you open the box and remove the case, this is what you get (rev.A). It has the windowed side panel as available on the Storm Stryker, that is an identical "but" white themed case.

56178

Here's a show of the Fans powered up. However, as commonly experienced by others, the camera doesn't quite capture the vibrant red color. The Lepa Chopper on the right doesn't quite look that way either, there is a hard to describe pattern that shows to the eye's that my camera doesn't capture. My best description would be what you would think the exhaust end of a running jet engine would look like. The fan isn't much for air flow, I only got it for the light show to have behind the front grilles of the case.

56179
56180
56181
56182

Here's some of the extra items added for the case mod, the main item to note is the side panel. A bit later you'll see what I'm doing with (2x) left hand side panels. Some spray paint (matte black, medium dark silver metallic, and medium red). Some pin-stripping tape that might be used. A roll of 3M Di-Noc Carbon-Fiber "black matte finish" film. Some fan mounting rubber fastners, Collaboratory Liquid Ultra TIM, and finally some automotive "Red" LED strips.

56183

I think most of the items here you'll recognize. But here goes, starting at top left, an additional Thermaltake Riing fan, SanDisk Extreme Cruzer 64GB USB 3.0 thumb-drive, Thermal Grizzly Kryonaut TIM,
NZXT IU01Case Accessory. Now at bottom left, then moving right, a set of ASUS Thermal Sensor Cables/Probes, ASUS TPM Module BitLocker FW3.19, a new BIOS Battery, and finally the "Red Heatsink Covers" for the cpu cooler.

56184


This mostly concludes the components and parts used for the build, as I'm sure there are a few more bits & pieces missed.
I'll see if we can catch them in the next round of pics showing the mods to the case.

So, Stay tuned for the next chapter, "Case Mods".

260 Views
16 REPLIES 16

Ntwlf
Level 12
@drop4205, Sounds awesome.
Are you going to make a build log with pics? I look forward to seeing it, if you do.

Yes, the Thermaltake Riing fans look pretty cool in how they are illuminated, and they are quiet too at full speed. I have had all (9) of mine powered up at the same time from a spare psu, and to my ears they are barely audible. I personally can't say as to how they compare to other fans performance wise (air flow), but they seem to move a decent amount of air.

drop4205
Level 12
I have had all 11 fans mocked up in case direct to power supply for full load to test them before I started to mod the wires on the fans to one connector for the 360 rad. They are pretty quiet and blow a decent amount of air. I may start a build log in a while. Never modded a computer before or watercooling but its a learning progress and fun. Cant wait to see you build.
Maximus XI Formula, I9-9900k, Phantex Evolove X, Seasonic Titanium 850W, Custom loop PE360+SE360 Rad, G.Skill Trident Z F4-3200C14 32g, Nvidia Reference RTX 2080 TI, Samsung 970 EVO Plus 1Tb, Windows 11

deblow
Level 9
Fantastic specs, this will be a sexy beast for sure 🙂
I know what you mean about the fans, really hard to capture red lighting mate, its something to do with the way red LEDs work.

I have the same fans, but cant say if they perform better than any others I have yet, as I have only used the Thermaltakes in my new build.
But from the hand test and noise I would say they will be great 😄

Nate152
Moderator
Stay tuned, Ntwlf is working on installing the operating system, an update is coming soon.

Can't wait to see how this turns out, what's your budget for this bad boy?
VG248QE x 2 | GeForce GTX 980 Ti | Gaming Mechanical Keyboards

Ntwlf
Level 12
Hi folks,

First off, I want to say "Thanks" to everyone who's has viewed my build. Wow... 1,016 at time of this writing.

@deblow, Thanks... The Thermaltake Riing's are the sexiest fans made in my opinion. If they're lacking in performance compared to Corsair AF, Noctua and a few others, I think I've made up for that with the quantity I've chosen. All the more sexier!;)

@MajorMajor, I'm trying my best to find the time for the next update "Mods". Budget?, I tossed that out the window early on. Have chosen to save for the hardware I wanted instead. I'm almost afraid to tally-up the investment to date.:rolleyes: I'll take it in consideration in the conclusion write-up of the build log.

Nate152 has been putting the pressure on me to complete the build as you see in his reply above, "an update is coming soon". We are having daily private chats with the progress.

The build is assembled and at the stage of "modifying the OS" install. Anyone heard of OS integration's? ie- updates,drivers, software,themes. I'll elaborate on that in a later chapter, as this build log will include much, much more than "any" build log I have seen to date, many chapter's. I hope everyone will enjoy the read.

Spring time is the busiest time of year for me. I repair lawn & garden equipment to help pay the bills and this PC I'm building. So I'm doing my best to get the pc up and running, plus getting the pics and such together to add to this build log.

So as Nate152 has said, "an update is coming soon".

drop4205
Level 12
Cant wait to see the progress on this. I have decided away from the thermaltake fans on my build as you got them in yours now lol. They are nice fans but I went with be quite and corsair red rings on my fans. There is a lot to getting the system together and looking good. No need to rush a good thing
Maximus XI Formula, I9-9900k, Phantex Evolove X, Seasonic Titanium 850W, Custom loop PE360+SE360 Rad, G.Skill Trident Z F4-3200C14 32g, Nvidia Reference RTX 2080 TI, Samsung 970 EVO Plus 1Tb, Windows 11