Pusher of the Pixels

[PowerOver9K]

Build in Progress - The Pusher of the Pixels
This video is before I said eh, "all out time".


ALL OUT Parts List: - This List is Dynamic, I will edit it as I go so watch this list!

Main Components:

Case: NZXT Phantom 820 Ultra Tower
Motherboard: ASUS Rampage IV Black Edition
Processor: Intel i7-4930K Ivy-Extreme
Thermal Interface Material: Indigo Xreme
PSU 1: eVGA SuperNOVA P2 1000W
PSU 2: eVGA SuperNOVA G2 850W
GPU: 4x AMD Radeon R9 290X
RAM: (32GB) 4x8GB Corsair Vengeance Pro 1866 DDR3 in Red
Storage: 2x Western Digital 2TB Black
Storage: 2x Samsung EVO 120GB SSD
Optical: LG BluRay
NZXT Store: Full Side Phantom 820 Window Panel (NO FAN!)

Cooling: (99% from :cool: FrozenCPU.com :cool:)

CPU Block: XSPC Raystorm Black /w Red Bezel
GPU Blocks: 4x EK 290X Acrylic
Reservoir: XSPC Dual Bay /w Red Bezel
Pump 1: XSPC Laing D5 (Swiftech MCP655 Vario)
Pump 2: Swiftech MCP655 Vario custom tapped to G1/4 ports
Radiator: Phobya G-Changer 1080 /w External G-Changer Stand
Radiator: Alphacool UT60 140mm
Radiator: XSPC AX360
Tubing: Primochill Advanced LRT Bloodshed Red
Fittings: ModMyToys for Monsoon White/Red Carbon Fiber Compression
Fittings: Monsoon Matte Black Compression Fittings
Fittings: Swiftech Quick Disconnects Black Chrome
Fittings: Bitspower 20mm Extender
Fittings: Monsoon 90 degree / 45 Degree
Fittings: Monsoon Red Disc Accent
Fittings: Phobya On/Off
Fittings: Alphacool 3-way tap/male-male
Coolant: Walgreens' NICE Distilled Water:cool:
Additive: Feser Cool Base Anti-Corrosion/Biocide
Case Fans: 3x NZXT 200mm
Rad Fans: 12x 120mm XSPC Xinrulian 1650rpm
Rad Fans: 2x 140mm XSPC Xinrulian 1650rpm
Fan Controller: Lamptron CW611
Additional: Cables from Bitfenix/ModRight/ModSmart(Random Extensions, splitters, extensions, 3-pin 9 ways, etc.)
Double PSU Adapter: Add2PSU

Monitors:

3x Crossover 27QW 2560x1440 AH-IPS Panels

Peripherals:

Logitech 5.1 Surround Sound
Steelseries Apex Keyboard
Mionix Avior 7000 Mouse
Steelseries 9HD Mousepad

This is as she stands right now next to me as I am waiting some parts. 😞 Those ugly rads hanging off the back will go bye-bye when I get the external 1080 box as will that 240 sitting in the bottom because I get to put a 2nd PSU there 😄

[Antronman]

You don't happen to have spare cash for a poor builder in need, do you? 😞

[PowerOver9K]

Heh. Teaser... It's bleeding air right now. Used a little over 2 liters of water to fill it so far. Air keeps coming out. Rocking it back and forth every 5 minutes for about a minute



Going to get most of the air out then quick disconnect it and move it back to my desk and bleed it a bit more... Then wire up all that VGA / Pump....

[Antronman]

Man, you have one crazy build.

[PowerOver9K]

Well, now it is done... But I need to cut a 2x 1" holes in the back case panel to stick the wires out nice so they don't drape across the front then I'm done which is what that ugly draped junk in the bottom left is... Have a 1" knockout punch coming next week. 😄

[PowerOver9K]

First run. Overclocked it in about 5 minutes to 4.5GHZ and ran RealBench.

[graphic]

hi PowerOver9K , this is a very cool and nice build 🙂
I can tell you have put allot of hard work, hard earned cash into it aswell......
My 4930k sits at 4.5 aswell with the fsb set at 125, 1.4vcore i think...
This is why I am going to try the old 3930k in the black edition first and see
how I go ?????
Here's a link to my project if your interested or have any comment's or remarks ?????
http://rog.asus.com/forum/showthread.php?45398-Project-quot-Rampage-quot
and I'm serious in that the ammount of cash we spend they should give us heaps of free
stuff....including a free os , hehe

[PowerOver9K]

Thanks for the free Assassin's Creed ASUS! (Ignore my desk mess!) 😄