cancel
Showing results for 
Search instead for 
Did you mean: 

PST: Project Silicon Talisman [Build Log]

faheemrazzaq
Level 7


Hi,

I am going to start a new build named PST: Project Silicon Talisman. I have received most of the parts and awaiting some. It is a combination of old and new parts. I am not upgrading monitor, CPU, motherboard and memory as there isn't much to gain with the Skylake over Haswell Devil's Canyon. The build consists of the following components:

Samsung U28D590D 28-Inch Ultra HD (4K) Monitor
CPU: Intel® Core™ i7-4790K Haswell Devil's Canyon
GPUs: 2x Sli Nvidia Galax/KFA2 GeForce GTX 980 Hall of Fame (HOF)
RAM: 16GB Corsair Vengeance Pro 2400MHz DDR3 (4x4gb)
Motherboard: MSI Z87-G45 Gaming
PSU: SuperFlower Leadex GOLD 1300W Fully Modular "80 Plus Gold" Power Supply - Black
Case: Phanteks Enthoo Luxe Full Tower Case - Black
Cabling: Custom cabling ordered to fit the red/white theme.

Watercooling loop:

Coolant: Mayhems Pastel Ice White
CPU Cooler: EK Water Blocks EK-Supremacy EVO
GPU Blocks by Diamond Cooling - White Acetal
14/10mm Acrylic Tubing
Barrows Black compression fittings
420mm Hardware Labs Black ICE Radiator GT Stealth 420 (Push+Pull)
360mm Hardware Labs Black ICE Radiator GTX 360 (Push+Pull)
Pumps: I am using two different pumps because I already own them and taking them off my existing loop
Pump 1: Swiftech MCP35X Industrial Pump 12 Volts
Pump 2: Swiftech MCP655-B Water Pump 12 Volts (EK-XTOP D5 Pump Top)
Radiator Fans:
420mm Rad: Push/Pull - 6x 140mm Akasa AK-FN063 Viper Fan High Performance S-FLOW Blade Quiet Fan - 3.12 mm/H2O
360mm Rad: Push - 3x 120mm Corsair SP120 High Performance Edition High Static Pressure Fan - 3.1 mm/H20
Pull - 2x 120mm Phobya G-Silent 1500rpm + 1x 120mm Cooler Master Fan


Thanks for watching. 🙂

19,113 Views
33 REPLIES 33

faheemrazzaq
Level 7

First coat on the fan grills. These will go on the rear side panel, which will be cut to accommodate 3 140mm fans for air intake.





While I wait for the waterblocks and working on some other bits n pieces; gpu's continue to serve me on air.

A few images of the gpus before the coolers come off for the waterblocks.













Painted 3x Akasa 140mm fans to go on the 420mm radiator. Not painting the other 3 Akasa fans that will be pulling air away from the radiator out of the case; as they are completely hidden.







And Corsair high static pressure high performance fans for 360mm rad.

I am going for 420mm and 360mm rad. 420mm rad is going in top of the case. Phanteks Enthoo Luxe cant take another triple rad in front or bottom. So I spent sometime messing around with 5.25" bays in front. And I managed to unscrew more than dozen of screws to remove the 5.25" cage, which means I will not be able to install my BD-RW drive but I really dont use it much and I have a spare external drive sitting around if required.

So here are a few images of 5.25" bays cage removal to fit 360mm rad in front.





A view from the top



After the cage detached, I noticed that all the case front panel cables were going through it. Took another 15 minutes to disconnect the cables and connect them back properly



And finally success. The cage is out and I can fit the 360mm radiator. Now I need to order one.