cancel
Showing results for 
Search instead for 
Did you mean: 

Project - The Next Level - 13-05-2012 Steel and wood

PasLis
Level 9
Hi Everyone,

Its time for another project.My idea/design to build a desk inside a frame with a glass top and without feet ive done 2 times.

Version 1.



Version 2.



I dont want to make a third version so now its time for a new design.This time i go for an ergonomic design.So this is the kickoff for my new project The Next Level.



The idea is to build a design desk that can be adjust in height so everyone can sit at it by simply push a button to move it up or down.My designs always change when im building so here a drawning how its gonna look.



The desk will be watercooled and the hardware is not decided yett.More about this later.
I already bought the lifting column and this is how it looks.











The specs.

• Thrust: up to 2500 N per DL2
• Speed: up to 20 mm/s with CBD4
• Installation dimensions can be seen in the
ordering example
• Stroke length 300 mm, 350 mm, 500 mm ± 4 mm
• Colour: Natural anodized aluminium profiles and
black painted end plates or electro-galvanised
3 mm end plates
• Low noise level
• Compact and mounting friendly design
• Built-in limit switches (not adjustable)
• Dimension column: 147 x 194 mm
• Dimension 8 mm end plates: 160 x 244 x 8 mm
• Dimension 3 mm end plates: flush with the
profiles
• Each column is fitted with a 740 mm ± 60 mm
straight black cable with an 8-pole AMP plug or
100 mm mini-fit cable
• Dynamic bending moment (at 100% stroke
length):
My+/Mx+ = 250 Nm and My-/Mx- = 200 Nm

And a little movie how it works.

http://www.youtube.com/watch?v=61hPwaFKs1E
103 Views
213 REPLIES 213

PasLis
Level 9
Hey guys,

I want to thank everyone for their votes and reading my log.I hope you enjoyed yourselfs.Thanks a lot Bit-Tech for an awesome moty and the judges and everybody that was involved.I still cant believe i won moty.Congratulations to all others because all project were awesome.

http://www.bit-tech.net/modding/2013/01/11/the-winners-mod-of-the-year-2012/1

I still have a few pictures left of The Next Level that i didnt share.I think this is a good moment to share them.































That was it and i also want to thank my sponsors for making this project possible.

Thanks a lot guys.















On to the next project i say. 😄

kkn
Level 14
well now you have a new case to mod in ;D
hope you had a nice x-mas and new year.
congrats on the first place paslis and you earned it too.

Myk_SilentShado
Level 15
Saved the best for last huh? congrats on your MOTY PasLis and also to your 3rd place for scratch build 🙂

kkn wrote:
well now you have a new case to mod in ;D
hope you had a nice x-mas and new year.
congrats on the first place paslis and you earned it too.


Indeed kkn my new project starts monday and again it will be a scratch build.Hope you had a nice x-mas and new year also.
Thanks a lot mate. 😄

Myk SilentShadow wrote:
Saved the best for last huh? congrats on your MOTY PasLis and also to your 3rd place for scratch build 🙂


Haha thanks a lot Myk. 😄