cancel
Showing results for 
Search instead for 
Did you mean: 

Project - The Next Level - 13-05-2012 Steel and wood

PasLis
Level 9
Hi Everyone,

Its time for another project.My idea/design to build a desk inside a frame with a glass top and without feet ive done 2 times.

Version 1.



Version 2.



I dont want to make a third version so now its time for a new design.This time i go for an ergonomic design.So this is the kickoff for my new project The Next Level.



The idea is to build a design desk that can be adjust in height so everyone can sit at it by simply push a button to move it up or down.My designs always change when im building so here a drawning how its gonna look.



The desk will be watercooled and the hardware is not decided yett.More about this later.
I already bought the lifting column and this is how it looks.











The specs.

• Thrust: up to 2500 N per DL2
• Speed: up to 20 mm/s with CBD4
• Installation dimensions can be seen in the
ordering example
• Stroke length 300 mm, 350 mm, 500 mm ± 4 mm
• Colour: Natural anodized aluminium profiles and
black painted end plates or electro-galvanised
3 mm end plates
• Low noise level
• Compact and mounting friendly design
• Built-in limit switches (not adjustable)
• Dimension column: 147 x 194 mm
• Dimension 8 mm end plates: 160 x 244 x 8 mm
• Dimension 3 mm end plates: flush with the
profiles
• Each column is fitted with a 740 mm ± 60 mm
straight black cable with an 8-pole AMP plug or
100 mm mini-fit cable
• Dynamic bending moment (at 100% stroke
length):
My+/Mx+ = 250 Nm and My-/Mx- = 200 Nm

And a little movie how it works.

http://www.youtube.com/watch?v=61hPwaFKs1E
180 Views
213 REPLIES 213

Nackers
Level 15
Hi PasLis, I've watched your build from start to finish and it's been pretty to watch. The finish Product Is Just Awesome Brother PasLis.. Looking forward to watching you work again..

fxwoody
Level 7
WOW! Nice build there!!! Love the fact that you added the wood richness to it 😉

Nothing impossible when you got the right tools!

Good job 😉

..--Maximus V Formula --.. ..--I7 3770k--.. ..--Corsair Dominator 1866 --.. ..--2x EAH6850 Crossfire--.. ..--750w Corsair--.. ..--Jiffy Lub WaterCooled--..

Nackers wrote:
Hi PasLis, I've watched your build from start to finish and it's been pretty to watch. The finish Product Is Just Awesome Brother PasLis.. Looking forward to watching you work again..


Thanks a lot Nackers. 😄

fxwoody wrote:
WOW! Nice build there!!! Love the fact that you added the wood richness to it 😉

Nothing impossible when you got the right tools!

Good job 😉


Thanks a lot fxwoody. 😄

Karmageddon
Level 7
This build is absolutely amazing and a complete combination of performance and ergonomics!

Are you thinking of putting dust filters behind those fans to slow the amount of dust that gathers inside it?

My Build

I7 3730k at 4.7 ghz
H100
16gb Corsair Dominator GT RAM at 1866 mhz
2 x Asus GTX DCU2 670's overclocked at 1258 mhz
1 x 1tb Storage Drive
1 x 2 tb Game Drive
1x 60 gb SSD Boot Drive
CoolerMaster HAF X
Kingwin Lazer 1000w

dubble post. 😞

The Next Level is a participant in the CM contest 2012.

Cooler Master - Scratch Mod Vote | Facebook



Good luck to all participants . 🙂

PasLis
Level 9
Thanks a lot Karmageddon and no im not but i have to clean it more often but thats the design. 😄

Myk_SilentShado
Level 15
I just voted PasLis mate, good luck. Love the final product btw, great work!! 😄

kkn
Level 14
voted!!!! 😄

ganji
Level 13
Voted! 😄