- last edited on by
ROGBot
Hi! My name is DJ Madrid a.k.a. "KRYPTEK PC MODZ" a noob modder, I'm from the Philippines. I started building a pc since 2011 and I pursued case modding mid 2013.
Processor: Intel i5 4670K
Motherboard: ASUS Maximus Formula VI
RAM module: Corsair Dominator Platinum 2x4GB 1600mhz
Graphics Card: ASUS GTX 770 DCUII 2GB
SSD: Samsung 840 PRO 120GB
HDD: Seagate Barracuda 1TB 7200rpm
PSU: Corsair HX650
Case: Corsair 600T Graphite
Sleeves: PinoyRIGZ/RENsleeve
Water Cooling
CPU Block: EK Supremacy
GPU Block: EK-VGA Supreme HF Bridge Edition - Acetal+EN (Nickel)
Pump: EK DCP 4.0
Reservoir: EK Multioption RES X2 - 150 Advanced
Radiator: Black Ice SR1 360mm
Fans: 3x Corsair AF120, 3x Corsair SP120
Fittings: Acrylic Compression Fitting 14mm OD, Bitspower 45deg & 90deg adapter
Tube: Acrylic Tube 14mm OD
Facebook Page: https://www.facebook.com/kryptekcasemodding?ref=bookmarks
Facebook Account: https://www.facebook.com/r3act187
Samsung 840 PRO 120GB SSD 😄
Cutting the back panel
Unscrewing....
Attaching the EK Supreme HF Bridge Edition GPU Block
Removing..
Painted with Signal Red can spray.
Attaching the EK Supreme HF Bridge Edition GPU Block
Removing..
Painted with Signal Red can spray.
Painted with Red Primer
Threading using G1/4 hand tap
The Water Channel 😄
Leak test time! 😄
Mounting my HDD at the back
The "Mayan" custom pattern
Final photos will upload soon 😉
Final photos 😉
