- last edited on by
ROGBot
After the finish of scratch build “ ROG Reactor “,it is time to start another project.
This time I going to mod the Cooler Master Storm Trooper case,to ASUS Republic of Gamers Edition.
As you know the scratch builds are my favorite,so prepare for lot of cut.
Before we start,big thanks goes to Cooler Master and ASUS Republic of Gamers,to they awesome support,because after a short conversation about the plans for the build they decided to sponsor the project.Thank you Cooler Master and ASUS for the support and trust in my project.
From Cooler Master:
-Storm Trooper case
-V 1000 power supply
- 10 pieces of JetFlo 120mm fans
From ASUS Republic of Gamers:
-Maximus VII Formula motherboard
-ASUS ROG Poseidon GTX770
So lets start with the case:
The PSU and the fans:
The motherboard and the GPU:
The PSU slowly getting into place:
Planning the water loop,the weather was so good,that I decided to go out…:)
Well guys this is my first time using CNC,some photos of training:)
But before I open,let me ask you guys what you think what is in the box?
ASUS was told me,be careful with the box its very HOT...
Moving forward,making some cover:
Moving forward,after a little break!
For grateful help and support,also for trust in my project
Also big thanks goes to:
Spacemaster
Milan Simić
Perica Bariii
Grega Mlakar
Peggy Avexir
Mundi Valur
Srđan Sudar
Istvan Katona
So guys here are the final photos:
At last but not least many thanks for my wife who tolerated me in the process!
And you guys who shared yours thoughts about and comments!
Thank you all!
