Project ICE - (custom PC Desk Build)

[Stephanisk]

Hello Everyone,

Small intro:
This is my first desk build from scratch, i am looking more than forward to it. ( i even bought a CNC router specially to make this, kind
of insane right 🙂 , well so will have to be this build. ) I want to make a functional, well equipped desk, with unbelievable detailing and
professionalism. No sponsors for me, but doesn't matter, the hardware is already here 🙂 .

The cooling solution, will be 2 separate loops, one cooled by radiator and one cooled by TEC cooling of of 600 Watt, all acrylic tubing,
somewhere a waterfall in the build and some other ideas.

Hardware will be: oh yes world famous ROG X99 Extreme!!!!! combined with a i7 5830k and 32gig of DDR4 G. Skill 3000
Graphics card will have to wait until the R9 Fury X is out and than 2 of these need to finalize the picture.
Monitors: 23 inch 1080p in triple for an eyefinity setup. Well that is the hardware i have laying here before me, disks and such i still need to have a
look for.

So that is enough of an intro.

Here comes the first render of my project. Yes you will have the same opinion as i have, no where near finished nor acceptable,
But we have to start somewhere. It is a basic, and i would love to get your opinion on this.
Whether your opinion for this layout is:
- been there, seen that
- This layout has a lot of potential.
- This could turn into a beast

Just shout it out. I won't be offended, in the end all comments help to build the perfect build!

Greetings,
Stephanisk

[Stephanisk]

So here is a new thought.

Acrylic bend tube through the desk, covered with plexi glas.

How about this?

Stephanisk

[Stephanisk]

It has been a while, cause it was kind of difficult to work on this project during the summer, but now we have some time again.

I have been purchasing quite a few nice tools.

Proud owner of a ROG Rampage X99 extreme.
Got my hands on 32Gb of DDR4 ram
And as a processor we got the 5930K

And the best thing i ever purchase in my life is my very own CNC machine. Jeehaaa, now i can finally make whatever i want to make!!!
We have been testing this baby out the past 2 months and it is working like a charm now. You can always have a look at the website i made
for it, cause we need to make some money too ofcourse 🙂 CNC Houtbewerking . I know the name is in
Dutch but yes, what do we do, i live there 🙂 If someone wants some custom made things for a build, let me know, the machine is available :))

I have been looking at my start here, but there is not enough glas in this design, it is way to conservative, i need to go out of the box on this one,
just can't get the perfect idea... so that's why i am writing this here, in hope to finally get the correct inspiration...