This build is now divided into two stages, the first being air, the build will be put together and in working order on air for testing and OC'ing before i continue and go on to stage two which is of course water, watercooling will be added and for that I am now designing a custom radiator and pump mount.
Okay now it is time for the actual update
😄It's been a while but finally the update I was looking forward to, in this update I test fitted all the hardware on the custom tray
🙂I finally received my Thread cutters for 6-32 (the size that the stand offs use) and went straight to it.

I don't have any photo's of mounting the hardware because that's pretty basic and I was too enthusiast to think about it.
Here are some pictures that I made after everything was mounted, there are a lot more pictures but I won't post all of them.







I've also put together another banner, this one I made myself, what's your opinion, which one should I use?

In this new banner you can also clearly see two new supporters of Project Deadpool, T-Grizzly and Cooler Master joined the project.
T-Grizzly sent out two Hydronaut kits for this and future projects, this is one of their High End Thermal Paste and comes with a special applying nozzle (called an Applicator) O.o can't wait to use it
😄
Cooler Master is sponsoring a PSU, the V1000 to be specific and also two other things but I'll keep that for myself for now
🙂Tell me your opinion about the current progress, even if you think something is off or did I forget to explain or mention something ?
Next update will probably have pictures of the modified SATA power connectors since they where 2 hairs too long and I need to make them a tiny bit shorter to have it fit and work
🙂