New project

[pcjunkie209]

This is a new build that I started after my artic formula build.

BloodSucker

Basic specs-
i7 930
Rampage 2 Extreme
Dominator GT 1866 kit
Cooler Master 1100 Ultimate
Lian-Li Lancool case
GTX????
Patriot SSD
Samsung DVD burner
Antec ezswap
3-WD 2 terabyte HD's

I'll upload some photos in a bit.:)

[pcjunkie209]

here's my new monitor



here's some of the parts....first the case



board




and some parts minus case and intel SSD

[pcjunkie209]

first broken case from newegg




and the RMA case










and getting ready for wire sleeving




front panel USB and Audio sleeved

[pcjunkie209]

more sleeving pics- front panel LEDs and switches







first step for fans is pre-cut supplies



here is hard drive cage that comes out with three screws...it can be rotated 360 degrees or removed for more room..this is one of the reasons i chose this case tool-less and options. had to pull it to get front 140mm fan out




then pulling apart fan wires for single braid sleeving




make sure u bend this little pin back out with a razor



finished fan



preparing top for 240mm rad- drilling holes



what it'll look like with rad attached



thats it for now....:)

[martin_metal_88]

Really nice! I think it's the first time I see case cable sleeving but eh! it's cool looking!! Any idea about the GPU you will use?

[pcjunkie209]

thanks Martin! ya as for case sleeving i was tired of looking at the black usb and audio so i thought why not make everything flow together
As for GPU, Not sure yet 570 comes out pretty quik here....:)

[martin_metal_88]

pcjunkie209 wrote:
thanks Martin! ya as for case sleeving i was tired of looking at the black usb and audio so i thought why not make everything flow together
As for GPU, Not sure yet 570 comes out pretty quik here....:)

Ahah XD If you ever have ot much money and no more power outlet for computer let me know;) I can rent you some XD. Never used this case before, how is the paint inside? Does it look like cheap swiftech paint or more like a plated paint?

[pcjunkie209]

Actually I was suprized on how good the paint was. It was done pretty good. I was expecting the worst but very pleased. When it's done I'll take some high res pics some maybe you can see better.

[martin_metal_88]

That would be awesome! This case was on my list for my next build. Well, my rebuild. I was looking to use my ATCS as a server case and put some hardware I have here in a smaller case like NZXT Phantom, Fractal XL, Lianli or lancool ( so many wonderfull one ). The fact is that I am tired of the blue and white of my GA board. I am waiting for these pic to see how it is and for sure, the final result 😉 Carry on my friend!

[pcjunkie209]

I was undecided about a case. I tried that nzxt tempest evo case and I really liked that but it's a bit bigger than I wanted for this build. Plus I had this lancool case last year in all black but the new red and black colors are nice. The whole inside shell of the case is red and the outer panels are black which makes a premium ROG addition! 🙂 so I would say definitely worth the cash. And thanks again Martin. This should be done shortlyill be adding to the F@H farm for the comp and maybe use as back up gamer!:)