My First ROG Water cooled Build (Build In Progress)

[GGHOOST]

"Beast" ROG Themed Gamer PC Build Log
Hi fellow Gamers

In this thread i will share my first Gaming build with custom water cooling.

I have never build at custom water cooled PC, so it was a lot of hours planning the water cooling part and how to make it all work

I made drawings for how to make the loop which case to buy, if the parts will fit etc.

This is what my "Beast" is made of:

CPU: Intel i7 4790K (Will be overclocked + Water cooled)
Motherboard: Asus Maximus Formula VII (Water cooled)
Case: Corsair Graphite 780
Ram: G.Skill TridentX 16GB 2400MHz CL10
GPU:EVGA GeForce GTX 980 SC in SLI (Will be overclocked + Water cooled)
PSU: Fractal Design Newton R3 1000W - White
SSD: Samsung 840 Pro 240 GB
HDD: WD 750 GB
CD/DVD: Asus External Drive
Monitor: ASUS VG248QE 24"
Headset: Steelseries Siberia Elite - White
Mouse: Corsair Vengeance M65
Keyboard: Corsair Vengeance K70
Other: Asus ROG Front Base
Front Intake Fans: 2x Corsair AFL140 Red Led (Included with case)
Rear Exhaust Fan: Alpenföhn 140mm Wing Boost 2 Plus PWM Fan in Red

The Cooling STUFF:

CPU: EK Water Blocks EK-Supremacy EVO
GPU: EK-FC980 GTX (Original CSQ) with EK-FC Bridge DUAL Parallel 3-Slot CSQ Plexi
Rad top: Hardware Labs Black ICE Radiator GT Stealth 360
Rad Bottom: Hardware Labs Black ICE Radiator GT Stealth 240
Fans for the rads: 10x Corsair SP120 PWM
Pump/res: EK Water Blocks EK-D5 Vario X-RES 140 (incl. pump)
Coolant: Mayhems X1 Blood Red Coolant
Fittings: XSPC G14" 90° Rotary Fitting (Black Chrome) and Phobya Compression Fitting - Black Nickel
Tubing: MasterKleer 13/10mm Clear
Temperature: XSPC Temp monitor Red and G¼ Plug Temp. Sensor
To clean the parts: Feser destilled water

Other STUFF:
You will see in the pics as I build my PC :cool:

[GGHOOST]

Look What i found under my bed 😛



Now i should get most of it this Week 😉

[JT297]

Sweet can't wait to see it once it gets pit together!

[GGHOOST]

And almost all the water cooling parts:

The CPU block and Res/pump combo


The 2 rads


And the coolant :cool:

[GGHOOST]

Then i installed the 360 and fans to the case



The rad goes a bit itto the front bay, so i hope i can fit the Asus front base :eek:





Picture of the front LED fans



This is what the side looks like, and I have only installed the fans.... 😛



I will post more later today when i have build a bit more. 😮

[GGHOOST]

And almost all the water cooling parts:

The CPU block and Res/pump combo


The 2 rads


And the coolant :cool:

[GGHOOST]

A litte close up of what i got yesterday :cool:

[GGHOOST]

Today i also got most of the Water cooling parts 😄




Something to clean the water cooling parts

[GGHOOST]

[GGHOOST]

Received all the small parts 😄