- last edited on by
ROGBot
Hi ROG,
I present you my mod components on Asus Strix Gaming.
For my 6th mod, I'll get into a scratch build 😛
Config:
Moterboard: ASUS Maximus VII Formula
CPU: I7 4770K
Ram: KIT 16go (4x4go) HyperX Beast 2400mhz cas11
Graphics card:SLI ASUS GTX970 oc 4go Strix
Power supply: Seasonic 1200w platinium
Fans: Full Noctua NF-F12 PWM PPC
SSD: Raid0 de 2 HyperX 3K 120go
HDD: 2 vélociraptor 1TO
screen: Asus PG278Q ROG
Wartercooling:
Waterblock CPU: EK Supremacy EVO
Waterblock GPU: EK-FC970 GTX Strix - Nickel + backplate
Radiator: 2 EKWB 360 PE
res: 1x EK X3-250
pomp: D5+top acetal EK
Tubing: Full Carbon
mouse Strix Claw
keyboard Strix Tactic Pro
headset Strix pro
mousepads Strix
Ok, holes, fasteners and adjustments to the upper part.
Next step, creating motherboard connectors crossing and graphics cards.
Stay tuned
Next step, creating motherboard connectors crossing and graphics cards.
Stay tuned
So my work today.
So I created my plate to make up for the missing 5mm thick PVC.
I have a first time cut the top of ALU and perfectly adjusted the motherboard connectors plate.
Once done, I cut a piece of PVC in which I also cut motherboard slots and two graphics cards. I used the dremel motosaw (Scroll Saw) and I finished by milling the edges to be perfectly straight and nikel.
And finally, to secure the PVC plate to the aluminum plate I had the idea of using small screws that led to Corsair Dominator DDR Platinum kit which served me. Suddenly it beyond my level attentent finishes, I'm really happy with the result.
All the images 🙂
So I created my plate to make up for the missing 5mm thick PVC.
I have a first time cut the top of ALU and perfectly adjusted the motherboard connectors plate.
Once done, I cut a piece of PVC in which I also cut motherboard slots and two graphics cards. I used the dremel motosaw (Scroll Saw) and I finished by milling the edges to be perfectly straight and nikel.
And finally, to secure the PVC plate to the aluminum plate I had the idea of using small screws that led to Corsair Dominator DDR Platinum kit which served me. Suddenly it beyond my level attentent finishes, I'm really happy with the result.
All the images 🙂
First tubing carbon installed!
looks very awesome, keep up the good work!
