- last edited on by
ROGBot
I swear, some days I should have stayed in bed.
So work called this morning. Said I had a new PC to build, and gave me some specs. I don't think this stuff exists in the real world. Said it was for the Foundation for Law and Government. One of those hush-hush outfits. I've built mil-spec before, but this looks positively aerospace-or black project. I was about to pass when Michael Knight called me up and asked me to do it. He said it was for an old friend. He's helped me in the past, so I agreed, for him. He promised me what I didn't have, they'd send. He seemed to be very interested in this getup. I never pegged Michael as the type to care about a PC though. I didn't hear his buddy either. I wonder if he's OK?
(As you can guess, this log will have fiction writing too, but it's only fair-I'm a writer. This is my final build-my hands are becoming too arthritic to keep going for much longer. After this, I may repair, and if someone wants to sponsor me fully, I'll consider it, but later this year my wife and I are building our dream home, and I'm going to concentrate on finishing my novel, other stories I have to tell, and I may take up painting again. I'm not tired of PCs, per se-I'm tired of constant rebuilds and cheap components exploding. I'm taking my time and sourcing some out of this world equipment, so I can have a nice break.
Why Knight Rider? Mostly, the influence of my wife. She remarked about how much I loved it, and when I said the fans would eat me alive, she reminded me that letting my OCD have fun with this might just prevent that from happening. We're both children of the 80s-1981 for me, 1982 for her-and we both loved it immensely. I tried to add Super Pursuit mode to my Big Wheel-I injured five people plus myself. Didn't stop me from trying again.
This is also a cover for the fact that this PC is a text-to-speech setup for me so I can continue to work with failing hands and eyesight. What better way to deal with a computer than treating it like one of the most beloved AIs in creative history? A speaker setup in the drive bays along with a good microphone and I'll be able to "talk to KITT" as well as use Dragon for dictation purposes. It'll help on the days where the pills aren't enough.
But you came for pictures. Pictures you shall receive!)
For reference, a lot of these pics were taken in tornado preparation mode-we had a pretty messed up floor from all the rains when I brought the case in (under a tornado warning that didn't expire for 10 more hours. You'll see lots of jugs of water and general mess as we got everything inside and backup supplies ready.)
Case, and board/proc ready to go in case. It's an Alienware Area-51 setup. I wanted something with bold lines to base the system on. The dent in the door is how I was able to acquire this. It wasn't easy.
Side view-those panels aren't plastic, either. They're electrostatically painted aluminum.
Rear view. You can see the PSU there-it's a 1100W Delta setup. Server grade. Modular (in a way) as well.
Case with door up. It's extremely big too.
Lower side panel ejection setup.
Board and processor installed. Processor is an i7-2600K.
Testing the hot-swap bays with a dead drive. I'm going to interface these with a storage controller initially. I have other ideas, but that will have to do for now.
Temporary RAM and hard drive installed. That's all I have that functions in the house. At least it still functions.
There it is dwarfing my 24" monitor.
Can you tell what's impressive about this shot?
So work called this morning. Said I had a new PC to build, and gave me some specs. I don't think this stuff exists in the real world. Said it was for the Foundation for Law and Government. One of those hush-hush outfits. I've built mil-spec before, but this looks positively aerospace-or black project. I was about to pass when Michael Knight called me up and asked me to do it. He said it was for an old friend. He's helped me in the past, so I agreed, for him. He promised me what I didn't have, they'd send. He seemed to be very interested in this getup. I never pegged Michael as the type to care about a PC though. I didn't hear his buddy either. I wonder if he's OK?
(As you can guess, this log will have fiction writing too, but it's only fair-I'm a writer. This is my final build-my hands are becoming too arthritic to keep going for much longer. After this, I may repair, and if someone wants to sponsor me fully, I'll consider it, but later this year my wife and I are building our dream home, and I'm going to concentrate on finishing my novel, other stories I have to tell, and I may take up painting again. I'm not tired of PCs, per se-I'm tired of constant rebuilds and cheap components exploding. I'm taking my time and sourcing some out of this world equipment, so I can have a nice break.
Why Knight Rider? Mostly, the influence of my wife. She remarked about how much I loved it, and when I said the fans would eat me alive, she reminded me that letting my OCD have fun with this might just prevent that from happening. We're both children of the 80s-1981 for me, 1982 for her-and we both loved it immensely. I tried to add Super Pursuit mode to my Big Wheel-I injured five people plus myself. Didn't stop me from trying again.
This is also a cover for the fact that this PC is a text-to-speech setup for me so I can continue to work with failing hands and eyesight. What better way to deal with a computer than treating it like one of the most beloved AIs in creative history? A speaker setup in the drive bays along with a good microphone and I'll be able to "talk to KITT" as well as use Dragon for dictation purposes. It'll help on the days where the pills aren't enough.
But you came for pictures. Pictures you shall receive!)
For reference, a lot of these pics were taken in tornado preparation mode-we had a pretty messed up floor from all the rains when I brought the case in (under a tornado warning that didn't expire for 10 more hours. You'll see lots of jugs of water and general mess as we got everything inside and backup supplies ready.)
Case, and board/proc ready to go in case. It's an Alienware Area-51 setup. I wanted something with bold lines to base the system on. The dent in the door is how I was able to acquire this. It wasn't easy.
Side view-those panels aren't plastic, either. They're electrostatically painted aluminum.
Rear view. You can see the PSU there-it's a 1100W Delta setup. Server grade. Modular (in a way) as well.
Case with door up. It's extremely big too.
Lower side panel ejection setup.
Board and processor installed. Processor is an i7-2600K.
Testing the hot-swap bays with a dead drive. I'm going to interface these with a storage controller initially. I have other ideas, but that will have to do for now.
Temporary RAM and hard drive installed. That's all I have that functions in the house. At least it still functions.
There it is dwarfing my 24" monitor.
Can you tell what's impressive about this shot?
How about now?
A bit blurry (and pill-strewn) but the other side and front/top are active as well.
You try catching moving vents with a still camera.
The moveable vents are active...
But that is most definitely not Dell hardware.
For my first miracle, I completely interfaced a Dell ESA setup from an Area 51 with an ASUS board, and told the software and firmware it was cool. I have full control over fans, pumps (when I get them,) lights, and servos. I also can use the ASUS thermal probes to control the fans and servos. It's a lot like an Arduino, if an Arduino came with a hefty 12V connection that could run 38mm Nidecs.
After proof of concept, next comes disassembly and modding. There's a lot of that to come. And I mean a LOT.
See you next time. Whenever that may be.
200 feet of furryletters Clean-Cut Techflex. Looks like a lot, huh? It's really not.
Battery compartment and interior trim piece gone...
PCI fan gone as well, they hid a lot of junk back here.
Big finger-chopping Nidec in there.
Vent trim piece removed.
Radiator bracket under the vent assembly...
Only took eight hours and the technician's manual to get there.
More angles, showing just how much was in there.
What's underneath the hard drive bays...
Yeah, took a lot off this thing to get here.
That was yesterday's work. Today, I sleeved. I'm not halfway through, and I used 100 feet of sleeving today, with no wasted pieces. There's just that much wiring in this thing. And I'm not done adding wires.
This piece needs to be redone, as it's too bulky, but you can see it's sleeved, then laced with waxed tape to keep the individual wires together. It's a NASA trick, as well as military, telephone lines and some custom cars. I did a lot of this to PBX lines back in my working days. It just fits the theme. Also, no zip ties whatsoever.
Another shot, showing that it really is too thick to be routed properly.
More wires sleeved and laced...
And more. This bundle runs the top of the case-all of them. So yeah, I've got a long ways to go. Most of the lines that have to be sleeved by themselves are done, though.
Also, this thing came in. Wonder what it does...
More whenever I can get to it, I overdid it today. Need some time to rest.
Kayin wrote:
.......this thing came in. Wonder what it does....
ya the voice synthesizer led of kitt or you may be use it to make the scanner in front of kitt
traduction ( the red light blinking in the car of Hasselhoff
ya had me when i saw the guts of that alien had been SaberTooth'd ... cudos...
aaahhhh... Winn-Dixie ... I do miss Florida.
aaahhhh... Winn-Dixie ... I do miss Florida.
This is one of three ambient temp sensors. It's a bit tough to see, but it's a Dallas one-wire. Best stuff out there.
A little better shot of it. The bracket around it attaches it to the case.
The MIO board and its three ambient temp sensors. As an aside, it's made by MSI. Who knew?
Arthritic or no, I'm still able to do the impossible. That was shrunk with a lighter, BTW.
I've finally finished all the sleeving for the case except for one ultrastrange connector that'll be getting split Techflex as I don't even know where to find or buy the tool to depin it, and it's double and triple-crimped anyway. I've partially completed the PSU braid, but it's a complex proprietary system developed by Delta for Dell, and it's VERY complex. There are lots of common lines and no colors are what they really ought to be. Still, I'm making progress. I'll probably have to wrap the base of the monolithic modular connector with self-welding tape, but we did that when prototyping anyway. What did you expect when adapting an 1100W T7500 workstation PSU?
Hopefully tomorrow I'll finish the sleeving and get started laying out the changes to the exterior panels. I'm doing the most tedious stuff first, so it gets done.
Also, I have to test my 470, my cat killed the waterblock on it by knocking it off my desk. The top can be replaced with a new slab of acrylic, but I have fears the card died with it, which would necessitate me giving the client my 470. If so, I'll be on the hunt for a video card, as I have no more. Not a fun place to be. The 470 had other issues, though-heat and power draw. Possibly, this is just an opportunity to remedy those issues.
