- last edited on by
ROGBot
Let go!
Put the case onto the Carbon vinyl
Cut everything out
Stick it!
Thnks to L3P i had some black assortiment of inbusses :rock::thumb:
Finished!
Tried something original with the Window panel 🙂
Better pics in Daylight.
Put the case onto the Carbon vinyl
Cut everything out
Stick it!
Thnks to L3P i had some black assortiment of inbusses :rock::thumb:
Finished!
Tried something original with the Window panel 🙂
Better pics in Daylight.
Bought some random hardware 😉
New:
OCZ OCZSSD2-2VTXE120G, voor die 60 euro 😉
Used
Mobo en Cpu 🙂
Asus Rog maximus 3
Intel 875K
Carbonize the cpu block till i can afford a identical plexi one 🙂
mobo with memory build:)
Testfit in the case, getting cramped already 😛
I have some little room left
With sidepanel
positioned the Dual pump and drilled the holes for it.
Bought at my local plumber store 2 metre of acrylic tubing.
First try:)
New:
OCZ OCZSSD2-2VTXE120G, voor die 60 euro 😉
Used
Mobo en Cpu 🙂
Asus Rog maximus 3
Intel 875K
Carbonize the cpu block till i can afford a identical plexi one 🙂
mobo with memory build:)
Testfit in the case, getting cramped already 😛
I have some little room left
With sidepanel
positioned the Dual pump and drilled the holes for it.
Bought at my local plumber store 2 metre of acrylic tubing.
First try:)
My working bench 😉
Heat it up, hold it inplace, take a sprint to kitchen and cool it down, mission succesfull!
Bp C47 where in the mail, gladly :D!:
Same as the SSD!
Prepared the tubing for the fittings, Just like Kier does, grind a 8mm edge.
Then i used speedhack! lol, i forgt to make shots of the buildup progress 😛
Heat it up, hold it inplace, take a sprint to kitchen and cool it down, mission succesfull!
Bp C47 where in the mail, gladly :D!:
Same as the SSD!
Prepared the tubing for the fittings, Just like Kier does, grind a 8mm edge.
Then i used speedhack! lol, i forgt to make shots of the buildup progress 😛
I dont have budget for the sleeving, maybe next month 🙂
Because there is no room between panel and mobotray, i need to route everything between the mobo and the mobopanel, but it worked 🙂
Some what clearer pics taken with a handycam 🙂
not allot of tekst, just better pics
Did some random sleeving, put 24/gpu extenders, black SATA cable and much better cablemanagement 🙂
Because there is no room between panel and mobotray, i need to route everything between the mobo and the mobopanel, but it worked 🙂
Some what clearer pics taken with a handycam 🙂
not allot of tekst, just better pics
Did some random sleeving, put 24/gpu extenders, black SATA cable and much better cablemanagement 🙂
Also did a boot 🙂
Soo, its quite done now, The system is up and running smoothly after some flaws,
First, because the solid tubing didnt expand to pick up the pressure what was left behind when u turn the system off i had some minor leaks, after a little chat Peter(l3p) came with an idea, that was to make a kind of balance line of 1/2tubing, so i made it like he suggested, and damn it worked, was a miracle! its running real smoothly now, Gladly 😉
Piics 🙂
Soo, its quite done now, The system is up and running smoothly after some flaws,
First, because the solid tubing didnt expand to pick up the pressure what was left behind when u turn the system off i had some minor leaks, after a little chat Peter(l3p) came with an idea, that was to make a kind of balance line of 1/2tubing, so i made it like he suggested, and damn it worked, was a miracle! its running real smoothly now, Gladly 😉
Piics 🙂
Little update 😛
started sleeving SSD part:D!
See u at the next update 😉
started sleeving SSD part:D!
See u at the next update 😉
