Hi,
I definitely need a little help or advice. I just finished another build but am afraid to close the side glass panel of the GT502 case. After installing the GPU and supporting it, I installed the Hpwr 12v cable...went to close the door and it's hitting the cable. i only need about another 3/8 but am afraid to push it. I know the cable is sensitive. No one has a 90 degree connector out yet. Cables and Psu are the Corsair Rm1000X shift. I called Asus and the rep stated it should fit. The rep stated maybe I didn't install it right. I inspected the gpu It is in correctly. I gently pushed on the glass and it has closed. I have GPU Teak 3 and the 12vHPWR is Green, with pins 1-6 at around 0.42a at idle does this sound good. Just afraid of it burning up. Thank you for any advice or words of wisdom.
