- last edited on by
ROGBot
Dear People, i like to show you my 50% rebuild Ranjintek Eris Evo, hope you like it 🙂
Hardware:
Z390 Aorus Master
i9 9900k
TUF Gaming 3080ti
Gskill Trident Z 32GB
Corsair MP600 2TB
-EKWB MB Fullcover, and EKWB GPU cooler, fittings and other stuff
-Aquacomputer Rad's and a Aquaaero controller (sry but ek one's sucks ^^)
i had this Idea for a long time and when Rajintek released this case i had to own it.
but it was faar away from beeing perfect, so i started to modelling a lot of new plates on allplan2020
(normaly this CAD is used to draw buildings 😛 )
this inkluding a all new Mainboardtray with a 90° offset, new nounting solutions for a 2-bay res/pump combo
and other optical plates to cover holes and stuff i dont wanna see inside my case...
if someone will have CAD drawings to mod his own Eris EVO just ask... i can give you (IFC/STL/DWG/DXF and PDF Plans)
Hardware:
Z390 Aorus Master
i9 9900k
TUF Gaming 3080ti
Gskill Trident Z 32GB
Corsair MP600 2TB
-EKWB MB Fullcover, and EKWB GPU cooler, fittings and other stuff
-Aquacomputer Rad's and a Aquaaero controller (sry but ek one's sucks ^^)
i had this Idea for a long time and when Rajintek released this case i had to own it.
but it was faar away from beeing perfect, so i started to modelling a lot of new plates on allplan2020
(normaly this CAD is used to draw buildings 😛 )
this inkluding a all new Mainboardtray with a 90° offset, new nounting solutions for a 2-bay res/pump combo
and other optical plates to cover holes and stuff i dont wanna see inside my case...
if someone will have CAD drawings to mod his own Eris EVO just ask... i can give you (IFC/STL/DWG/DXF and PDF Plans)
