- last edited on by
ROGBot
Adamski Mod Facebook Page
Rig Noobies
THE CASE
COOLER MASTER STORM TROOPER
"Storm Trooper. Join the mobile infantry."
Specifications:
Case: CM Storm Trooper
PSU: CM V series 850W
Motherboard: Asus Sabertooth Z87
CPU: Intel i7-4770k
GPU: SLI GTX 780
RAM: Corsair Vengeance PRO 16gb
SSD: Samsung 830 256gb
Cooling: Custom Liquid Cooling
I'm finally back again with a new case mod project! Some of you may know me already after my first project where I won the OCN's March 2013 MOTM. Now is the time for new project on the CoolerMaster CM Storm Trooper Case. 🙂
Project Imagination is going to be the line up of some of my mods. Another version of this mod is my scratch build that is ongoing right now, I call it Project Imagination SV. The Scratch Version.
Key Features:
1. Custom Reservoir
2. Hard clear tubing
3. Neat cable management
4. Windowed Side Panels
5. New Front Design
6. And couple surprises! 😉
Previous/ongoing mods :
Project Prodigious - OCN's March 2013 MOTM
Project Imagination SV
Other components will be added as I go through with the project. Comments, questions, critiques, and ideas are all welcome! Btw, not all the hardware to be used is final.
Subscribe on my OCN log for more detailed log:Project Imagination - OCN
Sponsors:
Cooler Master
AquaComputer
Tapping the acrylic pieces. One of the most intense and toughest part of this mod. Luckily, it didnt break.
Cementing the acrylic pieces to the water channel block.
Just some crafting. First time doing this. Covering the back panel cover with plastic resin.
Time for painting!
Sexy black. Love the result of this air can paint. The end results always looks like a powdered covered paint.
Done with the last coating!
Custom routed plate for the PSU shroud.
Was so excited at this point to finish it!
IMAGINATION pieces for the PSU shroud. They're so small and pain in the ass gluing it on the shroud!
Used the cutout on the acrylic to place and glue each pieces on the shroud.
IMAGINATION:OG
Cementing the acrylic pieces to the water channel block.
Just some crafting. First time doing this. Covering the back panel cover with plastic resin.
Time for painting!
Sexy black. Love the result of this air can paint. The end results always looks like a powdered covered paint.
Done with the last coating!
Custom routed plate for the PSU shroud.
Was so excited at this point to finish it!
IMAGINATION pieces for the PSU shroud. They're so small and pain in the ass gluing it on the shroud!
Used the cutout on the acrylic to place and glue each pieces on the shroud.
IMAGINATION:
BLACK again!
Custom cover for the double layered mobo tray for a cleaner look!
Done bending the tubings!
Its ALIVE!
Custom cover for the double layered mobo tray for a cleaner look!
Done bending the tubings!
Its ALIVE!
