- last edited on by
ROGBot
Well last build log didnt go as planned as i had a bad camera and it was hard for me to take a shot of every step i made.
This is a build im working on a couple of weeks and is my first "good" mod. I hope you like it and feel free to post questions, suggestions or concerns.
Let's Start with Spec:
Maximus VI Extreme
Intel Core i7 4770K
Corsair 650D
Corsair AX860
Seagate Baraccuda 2TB HDD
2x EVGA GTX Titan Signature
2xCorsair Dominator Platinum 2400Mhz 2x8Gb
2xOCZ Vertex 4 256Gb SSD
And of course MDPC Sleeves!
As for the water cooling...yes i will fully watercool this build wth EK waterblocks and especially the new clean blocks!
Lets Start!
Everything starts with a good bench and the right tools!
Im trying to learn how to take professional photos..i hope im it the right path.
Lets Get Started..im about to "clothe" the motherboard tray with black leather so i cut a piece to use as a template.
I like the contrast of gold with black so i changed the standoffs to brass ones a small detail that i wanted to add even tho it isnt visible.
The reason i used black leather is that i think it will fit the style of the build and the Red LED that im about to add later and also because i wanted to hide some holes that i didnt like!
And This is the Result. I used synthetic rubber adhesive so and stetch it enough so ill be able to hid the holes i dont like. I also used the dremel to make new holes for the rubber bands in places i think are more useful and visual better.
More picture coming soon.
This is a build im working on a couple of weeks and is my first "good" mod. I hope you like it and feel free to post questions, suggestions or concerns.
Let's Start with Spec:
Maximus VI Extreme
Intel Core i7 4770K
Corsair 650D
Corsair AX860
Seagate Baraccuda 2TB HDD
2x EVGA GTX Titan Signature
2xCorsair Dominator Platinum 2400Mhz 2x8Gb
2xOCZ Vertex 4 256Gb SSD
And of course MDPC Sleeves!
As for the water cooling...yes i will fully watercool this build wth EK waterblocks and especially the new clean blocks!
Lets Start!
Everything starts with a good bench and the right tools!
Im trying to learn how to take professional photos..i hope im it the right path.
Lets Get Started..im about to "clothe" the motherboard tray with black leather so i cut a piece to use as a template.
I like the contrast of gold with black so i changed the standoffs to brass ones a small detail that i wanted to add even tho it isnt visible.
The reason i used black leather is that i think it will fit the style of the build and the Red LED that im about to add later and also because i wanted to hide some holes that i didnt like!
And This is the Result. I used synthetic rubber adhesive so and stetch it enough so ill be able to hid the holes i dont like. I also used the dremel to make new holes for the rubber bands in places i think are more useful and visual better.
More picture coming soon.
