Hyper m.2 x16 gen 4 card
Hi all..Has anyone here installed this: HYPER M.2 X16 GEN 4 CARD. Specifically on a Rampage Extreme IV Black Edition Motherboard?If so, is it worth upgrading?ThanksRegards..
Hi all..Has anyone here installed this: HYPER M.2 X16 GEN 4 CARD. Specifically on a Rampage Extreme IV Black Edition Motherboard?If so, is it worth upgrading?ThanksRegards..
Hello, I have a problem. When I plug my Samsung Bar Plus USB 3.1 64GB brand flash memory into the front USB 3.0 port, sometimes the PC resets. Other USB sticks do not have this problem. However, Samsung Bar Plus USB 3.1 64GB brand flash memory does n...
So, was running a bit to hot with my new 3090TI and challenge was to fit everything inside a small Deepcool Mid-Tower and ...no more place !!!Well there's always some more space if you think outside the box loll Build a full compartment on the top an...
I have dream build in mind, but it would require using the GT51 Case as a base. I want to put these components inside the case:Asus Rampage V Edition 10 MotherboardIntel i7 6900K Processor128 GB of G.Skill Trident Z RGB DDR4 MemoryDual Asus ROG Stri...
Been a long time since i posted a new machine but after 10 years with my good old HAF ....was time to make a new transition So here's the build:Crosshair Formula VIIIRyzen 9 5900XCorsair Vengeance RGB PRO SL 64GBASUS NVIDIA GeForce RTX 3090 ROGBykSki...
Massive thanks to Intel for asking me to do a build for them.Thought i would share by build log for the projectSystem Specs 1 x Intel cpu under NDA 1 x ASUS ROG STRIX Z690 -E GAMING WIFI 1 X ASUS TUF GAMING RTX3090 OC 24GB 2 x Corsa...
I've got a Rog Strix X570E mb and an AMD 3900x processor. Memory is 2133. The pc run "Mapping Cancer Markers" (world Community Grid) 24/7 at 100%. CPUID show usage at 100%. Would upgrading to 4000 change the computers performance?
Looking at pairing the new TUF Gaming B650M Plus WiFi with a STRIX RTX 4090. Looking at the PCIE slot, it appears that a 3.5-4-slot GPU will overhang the edge of the board and not allow any connections there to be usable. Will this combo not work? Pa...
Any ideas on how to cut the hole for the Asus Thor? Anybody has a template of some sort?