My aRGB devices and motherboard RGB are not working in Aura Sync

[vortex1]

My aRGB devices (a Lian Li strimer & a Deepcool RGB CPU cover mirror) as well as the motherboard RGB not working in Aura Sync.

I have just changed motherboards froma Z790-H to a Z790-A II, and all the RGB devices were detected by the H, but not at present with the A.

I found this setting on the Dashboard under Aura Sync tab:

https://www.imagebam.com/view/MEVAQKP

Not sure if those 2x1, 2x2 settings refer to RGB gen's - because I do know this current motherboard is higher spec that the Z790-H motherboard; but I tried both and it still didn't work.

I've also tried re-installing AC ensuring I check any boxes for Aura.

If anyone has any ideas how to fix this it would be much appreciated.

[vortex1 · Accepted solution]

I fixed it.

For anyone else experiencing the same at some point - the normal Windows uninstall/re-install did not work, I had to go to the Asus Support site and download the dedicated Armoury Crate Uninstaller tool and run that. Then after re-install, the RGB devices were recognized - but I had to ensure the 'Select all' checkbox was marked for them the sync colour.