Gpu Tweak II OC Scan killed GPU?

[Auxilio]

Hey,

When using the OC scanner within GPU Tweak II, latest version 1.9.6.1, everything started off fine, then after a couple of minutes, my screen went completely black (no input signal), rebooting does not even show POST. I am pretty sure there is a way out of this (I hope), can someone please guide me. MB is a Z-390-F Gaming, and the video card is a 2080Ti dual OC 11Gb

Kind and some what desperate regards 🙂

[Arne_Saknussemm]

Have you tried clearing CMOS? With PSU off...

[Auxilio]

Arne Saknussemm wrote:
Have you tried clearing CMOS? With PSU off...

Yes I did, did not help 😞

[Auxilio]

There is also a white VGA led on the MB that is lit

[Arne_Saknussemm]

And you can't get into BIOS spamming DEL I take it...

Hmmm...not sure what to suggest...except disconnecting GPU and trying to boot to CPU onboard graphics...and then trying GPU again...

Is the PSU OK? Display cable

Do you have an old GPU to test?

[Auxilio]

Arne Saknussemm wrote:
And you can't get into BIOS spamming DEL I take it...

Hmmm...not sure what to suggest...except disconnecting GPU and trying to boot to CPU onboard graphics...and then trying GPU again...

Is the PSU OK? Display cable

Do you have an old GPU to test?

Thank you very much for your help, I got the card replaced so all good now 🙂

[Arne_Saknussemm]

OK...all good...there are always some lemons floating around....good luck with the new one...

Maybe try Precision X or Afterburner for the OC...doing it yourself is easy.